18x9.5 5x120 20mm offset! - I gotta ask

[fintheman]

Is it possible :)

I will cut the fender or roll it as needed and maybe get a stiffer rear spring to support it. What tire size with the fender cut?

The wheel fitment guide isn't as precise and I'd like it to be as I see people running 20's fine and 10inch wide without problems after rolling.

[Hummina]

no..... just no...not with a 20mm offset

[Taz GTO]

Not a chance. The wheel and tire will be sticking outside the fender.

[St.Mary]

Not a chance. The wheel and tire will be sticking outside the fender.

Come on guys....stop being so negative.

This IS possible....however:
You would have to have your rear raised so high, or suspension so stiff, that the tire did not compress to the body (ever). The offset you speak of would put the wheel about 2 inches outwards from where it is now.....so fender rolling aint gonna get you there.

All depends on what you need and are willing to deal with

[BobthePhotoGuy]

You could always cut about 3 inches of your fender out and install some serious flares.

Other than that....

NO!!!!