? about rims fitting

[PizzaDeliveryGuy]

I was looking to get these rims. I have tried to find information on this, but got frustrated and gave up. Will these actually fit? I do not care if i have to cut or roll the fenders. I just want to know if these will work or are literally an impossible fit. THANKS

http://cgi.ebay.com/ebaymotors/18-BMW-3-Camaro-Corvette-GTO-5x120-Wheels-Rims-HB_W0QQcmdZViewItemQQcategoryZ43958QQihZ003QQitemZ 130054223326QQrdZ1 Hell of a long address, i know.

The specs are:
Front Size: 18x8.5

Rear Size: 18x9.5

Bolt Pattern: 5x120

Front Lip Size: 2-3/4"

Rear Lip Size: 3-1/2

Front Offset: +35

Rear Offset: +45

[bran1093]

Yes they will fit :)

[Rob@WretchedMS]

Rears will fit, I'm not so sure on the fronts.

[hellraiza GOAT]

I was looking at the same rims, i searched the boards and almost everyone has had to roll the fenders to fit the rear tires...BUT i have a questions about the rears, if i wanted to sun a staggered setup but not run the 275's in the back, do i still need to roll the fender? Im thinking maybe a 255?

[Dozer]

Top Shelf Performance ( one of the sponsers on the left ) sells Ruff wheels.:D

[rotten23]

Yepp, they'll fit. You'll need to roll your rear fenders though in order to make it work.

[ChuckCT]

That auction states they come with 245/40/18 and 275/40/18.
275/40 is just about an inch larger in rolling diameter than a 245/40...I'm sure that won't help with fitting them in back.

[Dozer]

A 275x35x18 is alot closer to the stock 18" tire diameter.