Places to get my fenders rolled in Long island ny?

[Walter]

I'm way out east in suffolk but if someone knows of a great place in nassau I have no problems driving. Any suggestions?

[johnebgoode]

If this is needed due to lack of rear tire clearance, get the Pedders Rear Drag Springs. It will give you clearance you need without any noticeable difference. I have them in my car. Cost 180.00 and ya dont have to worry about paint cracking with roller.
Get a hold of Frank Beck,(My first GTO), he will hook ya up.

[Walter]

If this is needed due to lack of rear tire clearance, get the Pedders Rear Drag Springs. It will give you clearance you need without any noticeable difference. I have them in my car. Cost 180.00 and ya dont have to worry about paint cracking with roller.
Get a hold of Frank Beck,(My first GTO), he will hook ya up.

Are you sure about this? I'm gonna be putting 275's back there with a 9.5 wide wheel so I kinda figured this was a must.

[johnebgoode]

Are you sure about this? I'm gonna be putting 275's back there with a 9.5 wide wheel so I kinda figured this was a must.

I have had the 275's on mine with these springs and plenty of clearance......however it was a stock 17" wheel. Width wont be an issue, its the height that gives ya problems with clearance. Contact Frank Beck for further info, he is very helpful.

[Walter]

I have had the 275's on mine with these springs and plenty of clearance......however it was a stock 17" wheel. Width wont be an issue, its the height that gives ya problems with clearance. Contact Frank Beck for further info, he is very helpful.

these are the wheels

http://ls2gto.com/forums/showthread.php?t=121951

[johnebgoode]

these are the wheels

http://ls2gto.com/forums/showthread.php?t=121951

Like I said, Frank is best to give answers on this issue. He is a Pedders dealer.
http://www.rocksandracingllc.com/

[Juniorss]

Those wheels look like they are going to rub unless you cut your fenders. I dont know if rolling will make it clear