i purchase some rims and i need some help fast

[weedgoat]

whats up dudes i purchased a set of PIAA super rozza and the manufacture said that i can fit 285/30/19 on the rear and 245/45/19 what do you think.
i also wnat to put TEIN lowering srings about an inch of lowering will that be a problem runing those tires.
http://www.piaa.com/Wheels/img/2006PIAAWheelGuide. pdf

thats the PIAA web site a gain any imput will help alot

[Taz GTO]

I don't think you're gonna be able to do that. 45mm offset will require fender modification and putting lowering springs is just gonna make it worse. Plus 285 is too wide with that offset.

[whiteboyslo]

the link you posted shows that you should run 245/35/19s in the front. i'd say that would be a more appropriate choice. could you fit 285s in the rear? maybe. 275s may be a better idea. be prepared to trim/roll either way.

Mike

[Terrance27]

Yeah with a 45mm offset I had to trim my fenders to fit 275s on a 19x9.5 rims, so I know 285s will rub without a doubt.

[ChuckCT]

Dude...I don't think you wanna go with 245/45/19 and 275/40/19...those sizes are TWO INCHES TALLER than both the stock 245/45/17 and 235/40/18.

245/35/19 and 275/30/19 are much better options.

Most people who go with 275s have to at least roll the fenders anyway...unless you get lucky.

[bleek]

Chances are very high that it won't work.

I have 275s on 45 offset in the back. They don't rub, but I don't think 285s would fit.

[bleek]

oh but POST FREEKING PICS when you get those.

Those wheels are absolutely beautiful, I almost bought a set but they didnt have the 45 offset out at the time, and they were a little too rich for me.