PDA

View Full Version : Changing only two tires, any issues?




teamgs
04-11-2007, 01:23 PM
Greetings,
I am going to replace my OEM 235/40/18 REO40 with 245/40/18 General UHP's. The differences are:

REO40 - Diameter = 25.4", 820 Revs per mile
UPH - Diameter = 25.7", 810 Revs per mile.

Any forseeable issues with this? I.e. traction control, ABS, speedo, etc.

Finally, I seem to have determined from the many posts here that 245/40/18 tires should work on all 4 stock wheels, with no issues on 05-06's, correct?

Regards,

Gary




derf
04-11-2007, 01:25 PM
The actual OD can vary more than 0.3" just by how much air is in the tire. So you shouldn't even notice any difference.

245's all around should work just fine. That's what comes stock on factory 17's.

teamgs
04-11-2007, 01:39 PM
Thanks!