PDA

View Full Version : check these out




B SMOKD
02-17-2005, 12:04 PM
I just found the wheel I will be getting for my '05 GTO. They are made by Armano and are called Dunamis. I know that it has been covered over and over again, but somebody please confirm that a 18x9 with 255/35/18 will fit all the way around. I would like to be able to rotate them. If not, would they fit in the rear. I could go 18x9 rear 255/35/18 and 18x8 in front 245/35/18. I don't want any rubbing or fender rolling. They come in a +40 offset but I think I can get them larger according to Discount Tire here in MI.
Thank you in advance!




goatwrx
02-17-2005, 12:18 PM
http://www.thewheelconnection.com/php/showwheel.ph p?name=Dunamis&brand=Armano&brandsearch=1
for people that want to know what they look like.

Muff Daddy
02-17-2005, 01:13 PM
Looks like a wheel you would see on a suv. With a 40 offset and a 9inch rim I'm pretty sure you will have to roll the fenders.

miscreant
02-17-2005, 01:19 PM
I just found the wheel I will be getting for my '05 GTO. They are made by Armano and are called Dunamis. I know that it has been covered over and over again, but somebody please confirm that a 18x9 with 255/35/18 will fit all the way around. I would like to be able to rotate them. If not, would they fit in the rear. I could go 18x9 rear 255/35/18 and 18x8 in front 245/35/18. I don't want any rubbing or fender rolling. They come in a +40 offset but I think I can get them larger according to Discount Tire here in MI.
Thank you in advance!
Well, first 255/35 or 245/35 for that matter is too short of tire.

Second, 18x9 with 40 offset will not fit unless you HEAVILY roll the rear fenders, and will probably stick out and might rub on the front. however, 18x8 with 40mm ofset will work at all 4 corners.

CSiJason
02-17-2005, 01:39 PM
I've found at least a half dozen wheels that look similar in design to those and WILL fit the GTO. The XHP Saber is one of those and is available in 18x8 or 19x8" sizes to fit the GTO with a 42mm offset and 5x120mm lug pattern. They have either a machined face finish or a chrome plated finish. But you have to order them from Australia.

GTOKaren
02-17-2005, 06:11 PM
I've found at least a half dozen wheels that look similar in design to those and WILL fit the GTO. The XHP Saber is one of those and is available in 18x8 or 19x8" sizes to fit the GTO with a 42mm offset and 5x120mm lug pattern. They have either a machined face finish or a chrome plated finish. But you have to order them from Australia.

I just put MC2 FZ16s on my '04 GTO and they look very similar - come with tires and are made for the GTO and purchased through a dealer.

http://www.mc2ning.com/Pontiac/fz16.html#