PDA

View Full Version : Will these fit?



bandcstark
11-13-2007, 02:38 PM
I did a search and found that someone else asked if the new Commodore SSV 19" wheels would fit on a GTO. They said it did not because the bolt pattern was different. I email Kingwheels in AU and they said that its 5x120 and a 48mm offset. I dont see why they will not fit then. Can anyone clarify this question for me?

http://www.holden.com.au/www-holden/action/modeloverview?modelid=4006&modelid=4006



Lothar
11-13-2007, 02:44 PM
VE Commodore wheels are not 5x120.

If you want to be absolutely sure, email JHP.
<----------
ShelbyGoat
11-13-2007, 03:03 PM
This is the first one or two of many of these thread to come, but no, not the same.
bandcstark
11-13-2007, 04:36 PM
The sales guy over at wheel king in Australia told me they were 5x120. I will send an email to jhp to see if they can confirm.
Lothar
11-13-2007, 05:32 PM
The sales guy over at wheel king in Australia was either confused or wrong. I promise you 5 or 6 people on this board would have those wheels if they were 5x120.

Maybe he has some similar knock-offs that are 5x120?
bandcstark
11-19-2007, 07:22 AM
Ok, have exchanged several email with the guy over at JHP and he tells me that they are 5x120 with 48mm offset. But he said that they hub bore is smaller then that of the gto. So i it sounds like i would have to have the hubs bored out. What do you guys think?
schufflerbot
11-19-2007, 07:24 AM
Ok, have exchanged several email with the guy over at JHP and he tells me that they are 5x120 with 48mm offset. But he said that they hub bore is smaller then that of the gto. So i it sounds like i would have to have the hubs bored out. What do you guys think?

i think you should do it, then post pics or get bant.

good luck, i LOVE those wheels.