Mickey T's and Pedder's 5/16

[larrygto]

Can I run this combo without rolling or cutting?
Also wheres the best place to get them?
Thanks

[Black Devil]

A-4, might not be to bad. But unless you do a rear subframe alignment. Fully expect one side to rub. I have the 5/16 drag springs and run the M/T 275 drag radials. They slightly touch with stock wheels. But only due to my passanger side wheel tub having some extra metal vs. how much the other side has. When using my ZR-1 17x9.5 replicas. They don't rub. But they are 53mm offset, and I also added a 6mm spacer. Not a good idea unless uing ARP wheel studs.

[mk9190]

I'm running M/T 275s.To make them fit,I widened the factory 17s to 9 inches.I had to roll the inner wheel tub ahead of the shocks and grind about a 1/4 of an inch from the lower suspension arm.The outer fender lips and shocks are untouched.I'm running drag bags with 15lbs in them,no rubbing so far.