last chance..beyern

[AZ Power and Sound]

I had a customer cancel an order for his 18x8.5 Silver Beyern rims. First one to call gets em.

[Solobarictahoe]

which set of rims are they mesh or 5's

[Solobarictahoe]

i want to have a set of wheels made for my car do you think a 18x8 at 40mm offset in the front with a 245/40/18 and a 18x9 with a 53mm offset with a 285/35/18 in the rear would work thanks

[AZ Power and Sound]

solo...they are the 5s

do 45 offset front 53 rear for custom

[Solobarictahoe]

you dont think 45s in the front would bring the wheel in to much?
i have an idea about the offset just trying to get opinions thanks.

[Solobarictahoe]

do you think bfg's will work with this set up or do they run to wide? if so i might have to go with the nittos

[Knucklehead]

you dont think 45s in the front would bring the wheel in to much?

I wouldn't think so. The stock wheel offset is +48mm, so if you're talking about using the same size tire (245) on the same width wheel (8"), then switching to a +45mm offset would actually push the wheel / tire combo outboard by 3mm, or .118", or a little less than an eighth of an inch.

This would be just about right, as the stock +48 offset with stock tire can rub the strut tower base. This rubbing can get worse if you replace with different brand / model tire. That extra eighth gives you a little buffer to be able to use different brand tire.

Good Luck with it!

:driving:

[DisneyDJ]

Anyone claim these yet?