BFG DR's directional?

[larrygto]

I just picked up my BFG DR's yesterday, Looking at them the pattern seems to be directional. To line up the patterns one would have to be reversed. My question are these directional, Did I get 2 rights or 2 lefts or do you just reverse one and call it a day?
http://i99.photobucket.com/albums/l314/larrygto/03-26-08_1623.jpg
If you can see in the pattern one side is different than the other.
Thanks

[larrygto]

Heres another picture that might show better what I mean?
http://i99.photobucket.com/albums/l314/larrygto/03-27-08_1111.jpg

[nutiger]

Those aren't directional. If they were, you would see an arrow on the sidewall showing which direction it rotates. But I could be wrong!

[JonnieDago]

If they are directional there will be an arrow on the sidewall notating the rotation. No arrow, no problem. ;)

[redgto4u]

ok if they are not directional which way would you want to mount them for optimal traction? Since the rear tires on our cars tilt in some on accelaration would you want to install them so the big patches or the small patches are on the inside??

[larrygto]

There are no arrows, So you just mount the with one reversed?:confused:

[phantomgoat04]

ok if they are not directional which way would you want to mount them for optimal traction? Since the rear tires on our cars tilt in some on accelaration would you want to install them so the big patches or the small patches are on the inside??


if your really that concerned then put the big patches on the inside.

[nutiger]

How would BFG recommend the tire be mounted?

[Jim346]

I had those on my TA and I believe the big blocks went towards the outside. It should say right on the side of the tire.