Will these spacers work?

[StinkFingers]

Yeah just a quick question here.

My rear offset currently is 45mm but I want to bring it out to match the front 35mm offset. Didnt want to get the fronts shaved. :mullet:

Will these spacers work or will that bring them out too far?
http://www.ezaccessory.com/5_x_100_120mm_Spacer_5_ 16_Thick_p/605.htm

These are about 3mm here.
http://store.summitracing.com/partdetail.asp?autof ilter=1∂=GOR%2DSP601S&N=700+4294847663+4294906456+4294813120+115&autoview=sku (http://store.summitracing.com/partdetail.asp?auto filter=1&part=GOR%2DSP601S&N=700+4294847663+4294906456+4294813120+115&autoview=sku)

If that doesn't work, suggestions please...

[vqmotoring]

Why would you want to do that? dont you have a staggered setup? You want the rears to stick out 10mm more that what they do now? Or am i missunderstanding and what you want to do is make them stick out as much as the +35et sticks out in the front?
That first spacer would put it to around 37et so if thats a 9.5" rear wheel you have, then those thinks are going to stick out like crazy. If your fenders are cut,modded suspension then you might get away with a +42et by going with the 3mm spacers.

thanks,
www.vqmotoring.com
(877)-877-9420

[StinkFingers]

Why would you want to do that? dont you have a staggered setup? You want the rears to stick out 10mm more that what they do now? Or am i missunderstanding and what you want to do is make them stick out as much as the +35et sticks out in the front?
That first spacer would put it to around 37et so if thats a 9.5" rear wheel you have, then those thinks are going to stick out like crazy. If your fenders are cut,modded suspension then you might get away with a +42et by going with the 3mm spacers.

thanks,
www.vqmotoring.com (http://www.vqmotoring.com)
(877)-877-9420

Yeah I ment to get my fronts shaved when I ordered them from you guys, but I forgot to get that. So since I dont really know anyone around here that can do that or is reputable. I am looking at bringing the backs out to make it look a little better.
Lets say I do find a shop to shave them, whats the farthest I can take them down without compromising structural integrity? 3mm-5mm maybe?