Subframe Connectors

Who's got the best deal on Subframe connectors?? Cash in hand Sponsors...Jeremy

I really like my Energy Suspension. They are MUCH cheaper than a Pedders bushing, and I've also read they fit better.

subframe connectors? or subframe bushings? big difference.... as to my knowledge, BMR is the only company out there with subframe connectors. subframe bushing on the other hand, you have a much larger pick.. along with different people carrying the same part # for different prices.

subframe connectors? or subframe bushings? big difference.... as to my knowledge, BMR is the only company out there with subframe connectors. subframe bushing on the other hand, you have a much larger pick.. along with different people carrying the same part # for different prices.

Connectors..

Oh, then forget my post. :p

Oh, then forget my post. :p


LOL..its all good man..

BMR is it unless you make your own. from what i've read over the years the benefit is minimal. we have pretty stout cars unlike the F-bods

BMR is it unless you make your own. from what i've read over the years the benefit is minimal. we have pretty stout cars unlike the F-bods


Thanks for the info..maybe I'll hold off for a little bit..Jeremy

They weigh about 80lbs too!

i think you'd benefit more from the Harrop cover with your mods

got an 8.8 conversion..lol..thats going backwards..Jeremy

i'd say. it looks like you're putting down some serious power :D

Who's got the best deal on Subframe connectors?? Cash in hand Sponsors...Jeremy

I'm in the market for some as well. Some of the vendors used to discount them, but I couldn't find any on sale when I was looking around last week.

I have an 8.8 conversion sitting on the bench ready to install as well. Any advice or tips?

They weigh about 80lbs too!

no kidding!!!

About the best thing I've seen with Subframe connectors is the car is really easy to jack up. I'd don't have them but I've seen guys who do and will lift one entire side with the jack to change tires at the track!

They weigh about 80lbs too!

Not quite.....more like 30 # IIRC

i'd say. it looks like you're putting down some serious power :D

Thanks man..those are old numbers..stay tuned for the new setup:turbonaug

I'm in the market for some as well. Some of the vendors used to discount them, but I couldn't find any on sale when I was looking around last week.

I have an 8.8 conversion sitting on the bench ready to install as well. Any advice or tips?

Gimme a call man..540-903-1885..Jeremy

Who's got the best deal on Subframe connectors?? Cash in hand Sponsors...Jeremy

Your signature indicates all kinds of engine enhancement stuff, but no suspension stuff. If you want better traction, there are a ton of things you will need to do first. If you want our advise, give us your goals, budget and if you will be doing the work
yourself

What was the reason you wanted to go with them in the first place

mike
dms

Your signature indicates all kinds of engine enhancement stuff, but no suspension stuff. If you want better traction, there are a ton of things you will need to do first. If you want our advise, give us your goals, budget and if you will be doing the work
yourself

What was the reason you wanted to go with them in the first place

mike
dms

I plan on getting pedderized real soon..Everything has been done in huge waves and suspension is next...this is gonna be a street car mainly and tracked occasionally (probably more now that I've got it built up). I've really been looking at your track setups but want to make a few tweaks. I'll give you guys a call so we can go over some things..Also I will be doing the install...Jeremy