What rims require hub centric rings?

[jamesbiz]

I'm trying to make a list of all the rims that my rings are compatible with. The standard size 72.5 rings.
This is the list I have so far.
Beyern's
AZA's
BMW rims
Ruff Racing
CSL replicas
Breyton's
ROH's
Stern's
ADR's
ASA's
MRR GT-5's
Ruff 278's
MSW's
MRR GT-1's
Velocity Motoring VMR V seriies
American Racing

[r0nd3L]

Almost all aftermarket ones except custom made like CCW (not in flink's case I guess????) and what not.

Not all are same size bore though, so not sure.

[Captain Morgan]

what is the bore size on the OEM wheels/hub?

[jamesbiz]

what is the bore size on the OEM wheels/hub?

69.5mm

[jamesbiz]

TTT for the BMW owner who hopefully can help me out? ;)

[GTO 06]

I have them in my TSW indy 500's...

[jamesbiz]

I have them in my TSW indy 500's...

those are larger then the standard size. I'd make those as well but don't have enough interest for them

[jamesbiz]

Still need some help with this guys. Am I missing any out of my list?

[jonathan8751]

I have some MRR GT-5's and they have a 72.6 and I need some hub rings for them would. These should work.

[jamesbiz]

I have some MRR GT-5's and they have a 72.6 and I need some hub rings for them would. These should work.

yep, they should work just perfect. Thank you

[04blackgmc]

just used a set of your rings tonight. Put anti seize on them and slide em in the wheel. Good product

[jamesbiz]

just used a set of your rings tonight. Put anti seize on them and slide em in the wheel. Good product

Thank you. What rims?

[04blackgmc]

Thank you. What rims?ruff 278's

[jamesbiz]

Thanks for the help guys. keep them coming

[jamesbiz]

anyone else got a rim to add to the list?

[Flashpoint]

Most ROH wheels come with aluminum hubcentric rings pressed in, I know my Drift-R's (original version) did, and seen that claim for other models.

[jamesbiz]

Most ROH wheels come with aluminum hubcentric rings pressed in, I know my Drift-R's (original version) did, and seen that claim for other models.

I think that's only the new ones. Not sure tho. Just going by what my customers have told me they bought the rings for. Haven't had a single person tell me that they didn't fit yet, so :confused:

[Flashpoint]

I think that's only the new ones. Not sure tho. Just going by what my customers have told me they bought the rings for. Haven't had a single person tell me that they didn't fit yet, so :confused:

Mine are the really old ones, The ones that actually have the proper offsets to clear without fender mods at all and still have a 9" wheel with 275 series tires on the rear, advertised and sold for the GTO... no longer in production.

Maybe it is changed now and they don't have them anymore. :dunno:

[jamesbiz]

anymore?

[LBarnes]

SSR with BMW center bore 72.5. Can you help???

[r0nd3L]

SSR with BMW center bore 72.5. Can you help???

Standard set of hub rings should work.

[Underoath]

No dice on the TSW Caldwells, James?

Edit: Just saw you have a presale on the site. Any idea to when they'll be ready and shipping?

[jamesbiz]

No dice on the TSW Caldwells, James?

Edit: Just saw you have a presale on the site. Any idea to when they'll be ready and shipping?

I'm looking at a couple weeks. All depending on how soon the lathe is free.

[Underoath]

I'm looking at a couple weeks. All depending on how soon the lathe is free.

Super duper James. I'll be placing a preorder as soon as my wheels come in.

[My Little GTO]

Anybody know the bore size on American Racing Wheels? Torq Thrust M's in particular? I may need some but I'm not sure of the bore size.

[thekingntb]

Good thread....

[doublered06]

just ordered a set of AZA Z01s and would like to know what rings i should order. Thanks for the help.

[batboy]

SSR Type C RS wheels use 72.65mm/69.5mm hub rings.

[jamesbiz]

just ordered a set of AZA Z01s and would like to know what rings i should order. Thanks for the help.

The standard set. One is for ONE ring and the other is for FOUR. Hope that helps :) Let me know if you have any other questions, thank you.

[doublered06]

Thanks for the help they are on the way!

[2gtsvette]

not to sound like an idiot... but when are hub rings used? Thanks!

[batboy]

Most aftermarket wheels nowadays have a larger hub than what's on the GTO so they'll fit various cars (for example BMW). They use a hug centric ring to center the wheel.

[2gtsvette]

i have a lil vibration at 45mph and i am getting some bad road noise.. do you guys think the hub rings will help? ive personally balanced my wheels twice and i know for a fact that they are straight.

[jamesbiz]

i have a lil vibration at 45mph and i am getting some bad road noise.. do you guys think the hub rings will help? ive personally balanced my wheels twice and i know for a fact that they are straight.

Can't answer that for sure but usually it is the hub rings that are needed to solve it. The wheels can be perfectly balanced, but it's never going go help this as it has nothing to do with balanced wheels.

[GTO_Greg]

Do ROH Drift-Rs require these rings? I could use any feedback/recommendations on lugs to use and where to find them. This is my first foray into anything but stock rims...

[jamesbiz]

Do ROH Drift-Rs require these rings? I could use any feedback/recommendations on lugs to use and where to find them. This is my first foray into anything but stock rims...

yes most ROH's require these rims. I've been told some come with some kind of ring, but I don't know the exact details

[jamesbiz]

hey does anyone know the hubsize of the foose rims?

[HORTENSE]

aye jamesbiz, i need a set of rings for my new commuter wheels! my msw's measured out to 73.025 but that's using measuring tape. i have not access to a caliper, mate. is that relatively a typical size?

btw, oz designed msw's so perhaps they share the same blueprints.

[Kingsize]

yes most ROH's require these rims. I've been told some come with some kind of ring, but I don't know the exact details

ROH wheels made for the GTO do not require hub rings of any kind. All ROH wheels made for the GTO already have a permanent ring pressed into the wheel bore to center the wheel correctly when installed.

[plautz]

does anyone know if know the size ring for greg weld wheels. I have had them balanced 5 times by three diff. shops and still the vibration.

[EvanGTO87]

yea im in the same boat but i need them for summit star wheels. It appears they have an 83 mm bore so i need to find the ring for that. Here are the wheels.

http://store.summitracing.com/partdetail.asp?autof ilter=1&part=SUM%2D521%2D5862PS&N=700+4294923107+4294923106+400304+4294793325+4294 755960+4294795098+4294795010+115&autoview=sku

http://store.summitracing.com/partdetail.asp?autof ilter=1&part=SUM%2D521%2D5461PS&N=700+4294923107+4294923106+400304+4294793325+4294 755960+4294794988+115&autoview=sku

[jamesbiz]

all depends on how popular the wheels are guys. One offs won't be worth it for you.

[EvanGTO87]

the rings i think will work are the 82mm outside diameter and 70.5 inside diameter. Is this correct for the gto with 83 mm bore wheels?

[HORTENSE]

jamesbiz, add msw to the list of confirmed wheels.

the set arrived today and made my type 12s fit like a GLOVE! thx. :)

[jamesbiz]

cool, thanks :) .Just have them as msw wheels?