PDA

View Full Version : New wheels go figure!!




ejb04yj
11-10-2008, 03:40 PM
I received my new wheels, and had wheels installed; with bl bl bla.
I check them out a littler closer. Wam!! the wheel holes are different depth on the front 8" wheels. The lugs ( which are all alike and from same box) stick out further (~1/4 to 3/8s) on one side than the other. I measured the hole and they are different depth. The installer stated they believe the offset is different between the two.
What do you think, ever hear of such a ----up??




Night
11-10-2008, 03:48 PM
This is new to me. And I have installed custom wheels in the past. Get the odd-ball rim exchanged with the correct one.

Hummina
11-10-2008, 03:51 PM
pull off one of the wheels and there should be the offset stamped/casted into the back of one of the spokes. if thye both read the same, measure:)

bgable
11-10-2008, 03:53 PM
id call the vendor i got them from and have them switch for the wheel with the right offset