Need Help Will These Fit???

[GTO Kills All]

http://discounttires.com/detail_wheels.php?product TypeID=827&finish_category=BLACK&style=

In black finish i think they would look sick on my goat.Does any1 have any experience with these wheels/brand??I would be getting (2)5/120 18x8.5 +35, (2)5/120 18x9.5 +35.The numbers look good to me but im no expert.I wouldnt mind rolling the rear fenders if need be and as far as tires id be going with 245/40/18 front, 275/35/18 rears.What you guys think i need as much info as possible because i rlly want these rims but i need a little more info on the fitment/product.All info is appriciated thanks guys.Im open to any suggestions to change my setup weather its tire size or rim size.

If any1 can do a Photoshop what they would look like on a QSM i would be in their debt just to see roughly how it would look

[Deak]

Well, the rears you are looking at will rub. Even with a 9.5" wide wheel with 50mm offset might* rub without rolling the quater panels. 35mm would stick out too far. People have problems with 45mm offsets with the same widths.

I think even a 35mm in front would be sticking out of the wheel well and the outside of the tire would rub on the inner plastic in full lock.

hope this makes some sense, do a search. Also look for one of those wheel offset calculators. Our stock offset is 48mm with a 8" width.

[superchargedgp]

you need about +48 offset on the 9.5 inch rim in the rear, and that still might rub

[GTO Kills All]

Wow i was misinformed damn so i need a rim with a much higher offset.Thanks for the help guys damn i rlly liked these rims to lol

[Underoath]

Damn...Don't mean to hijack but you're saying
FRONT SIZE: 19 x 8.0
REAR SIZE: 19 x 9.5
PCD: 5 x 120
FRONT OFFSET: +35
REAR OFFSET: +45
w/ 275's and cut fenders would be a no go??

[04TRGTOOO]

hey guys cheking out this rims its a 18x7.5 all around with a 45mm offset you think these will fit let me know?

http://www.wheelmax.com/product.asp?ProdId=14700

thanks for any help in advance.

[04TRGTOOO]

and by i fit i mean if i kept everything stock without cutting or even rolling my fenders wells will they rub?

[Underoath]

and by i fit i mean if i kept everything stock without cutting or even rolling my fenders wells will they rub?

Depends on what tires you plan on putting on. 235's will be fine. Anything over that and it depends on the tire.

[04TRGTOOO]

Depends on what tires you plan on putting on. 235's will be fine. Anything over that and it depends on the tire.


245/40/18 i had another question i have 18x8 rims that rub just barely i know i can roll my fender wells and theyll be fine but i want black rims so you think i can keep the tires off this rim and put it on the 18x7.5 or will i need new tires also?

[superchargedgp]

Damn...Don't mean to hijack but you're saying
FRONT SIZE: 19 x 8.0
REAR SIZE: 19 x 9.5
PCD: 5 x 120
FRONT OFFSET: +35
REAR OFFSET: +45
w/ 275's and cut fenders would be a no go??

i have 18x8.5 in the front wihr +35 offset front rolled
rear 18x9.5 with +48 offset rear fenders cut to fit 275 tire
and i'm looking for a local place to machine the fronts to +38 to bring them in a little
If i find one you can get yours machined to the same specs