PDA

View Full Version : ROH Drift R's on a CGM



UltraViolence
03-15-2009, 05:41 PM
I just bought a set of 19x9 and 19x10 ROH Drift R's from SRGTO, who I might add is a great seller and I have no problems recommending him to anyone.

Anyway, I got them put on. The front tires are 265/30/19 Toyo T1R (I'm replacing them with 255/35/19 RE-11 soon). The rear tires are 275/30/19 Bridgestone RE-11. The RE-11 are absolutely amazing! Get them if you can afford them.

Sorry for the crappy pics. My camera sucks.

http://i172.photobucket.com/albums/w3/acontreras42 6/GTO/Picture009.jpg

http://i172.photobucket.com/albums/w3/acontreras42 6/GTO/Picture010.jpg

http://i172.photobucket.com/albums/w3/acontreras42 6/GTO/Picture014.jpg



thekingntb
03-15-2009, 05:42 PM
Those look real nice... Congrats on the new wheels!
05ls7gto
03-15-2009, 05:43 PM
Looks badass, Drift R's are one of my favorite wheels for Goats.
BrazenCPL
03-15-2009, 06:05 PM
They look good - do you have Pedders 0 drops in rear?
05ls7gto
03-15-2009, 06:07 PM
A bit off topic, but to the OP - Can you show me a picture of your IAT relocate on the Volant?
UltraViolence
03-15-2009, 06:13 PM
They look good - do you have Pedders 0 drops in rear?

Yup, Pedders Track II with 0 drop.

A bit off topic, but to the OP - Can you show me a picture of your IAT relocate on the Volant?

I'll get a pic for you in a bit. I have the IAT drilled into the filter inside the air box.
SRGTO
03-15-2009, 06:17 PM
Those look EXCELLENT on the CGM! I am glad you are enjoying them.
05ls7gto
03-15-2009, 06:20 PM
I'll get a pic for you in a bit. I have the IAT drilled into the filter inside the air box.

Yeah that's what I thought. I just want to see how you set it up in there. (ie Where you cut the holes and stuff.)
Lorider680
03-15-2009, 06:22 PM
Drop your whip.
F
JonnieDago
03-15-2009, 07:07 PM
you planning on going 4 wheelin? lower that thing.
UltraViolence
03-15-2009, 07:26 PM
Drop your whip.
F

you planning on going 4 wheelin? lower that thing.

Haha! Nope! I've dealt with loweing cars, and I'll never do it again!

I had an '02 Camaro SS with Eibach sportline springs. What a pain in the ass that was.
UltraViolence
03-15-2009, 07:27 PM
Yeah that's what I thought. I just want to see how you set it up in there. (ie Where you cut the holes and stuff.)

The hole is smack dab in the middle of the filter.
angermgmt20
03-16-2009, 01:54 PM
I got the same ones but with Toyo's all around. Drift-R's FTW!
Daisey Moonshine
03-16-2009, 02:09 PM
They look very nice on your CGM!
UltraViolence
03-16-2009, 02:20 PM
I got the same ones but with Toyo's all around. Drift-R's FTW!

They look good! Do you have any issues with them rubbing at all? Especially the front. Mine haven't rubbed in the front, but they do in the rear when going up steep drive ways.

They look very nice on your CGM!

Thank you.
nsurge
03-16-2009, 02:59 PM
I just bought a set of 19x9 and 19x10 ROH Drift R's from SRGTO, who I might add is a great seller and I have no problems recommending him to anyone.

Anyway, I got them put on. The front tires are 265/30/19 Toyo T1R (I'm replacing them with 255/35/19 RE-11 soon). The rear tires are 275/30/19 Bridgestone RE-11. The RE-11 are absolutely amazing! Get them if you can afford them.



265s on the front??? replacing with a 255? I thought anything bigger then a 235 on an 18" + wheel wouldn't fit...?
UltraViolence
03-16-2009, 05:11 PM
265s on the front??? replacing with a 255? I thought anything bigger then a 235 on an 18" + wheel wouldn't fit...?

Yeah, 265 on the front right now. I'm switching over to a 255 so I can match the front and rear tires.

They fit well as it is. The previous owner never had any problems either. Apparently Group A Wheels did their homework on these wheels. They are specifically made to fit '04-'06 GTO's.
angermgmt20
03-16-2009, 05:30 PM
They look good! Do you have any issues with them rubbing at all? Especially the front. Mine haven't rubbed in the front, but they do in the rear when going up steep drive ways.



Thank you.

I have 5/16" drag springs in the rear for insurance, I probably could go 285 if I wanted. The fronts I have a 20mm drop spring and I haven't seen any rubbing issues yet. Although the tire is REALLY close to the strut.
SRGTO
03-16-2009, 05:50 PM
The 265's up front will NOT rub as long as you keep the Toyo's. If you switch over to the RE-11's you may want to go 255 as they run a little wider than the Toyo's. Same for the back, the 285's Toyo will not rub with a rolled fender (check the inner well and massage with hammer if needed). If you go with the RE-11's the widest I would go would be 275's.

Again, they look great on your car!
sprocketeer
03-17-2009, 05:42 AM
Crappy work computer.
DizzyLizard
03-17-2009, 06:50 AM
I love my Drift-R's as well, except i bought mine 3 years ago when they were supposedly getting discontinued and i had to pay an arm and a leg for them. They have gone down in price since then.
As for fitment, yes, Group-A and ROH did their homework with these wheels. Other than a set of 1-off forged wheels made to order, you WON'T find a better fitting wheel, not one thats mass produced at least.