PDA

View Full Version : how hard to rebolt audi 5x112 to 5x120



larry79
05-27-2009, 11:51 AM
I am very determined to have the V708 wheels http://www.modbargains.com/product.aspx?pf_id=V708 RS4StyleWheel
The offset for our bolt pattern is 5x120 38 offset for the rear which i know will not work. On the other hand the audi offset's will work Available Size: 19x8.5'' // 19x9.5"
Offset: ET-38,48 // ET-38,45
My questions is how, where, and how much would it be to transform the Audi bolt pattern to our bolt pattern. Any ideas ??



Daniel Linnett
05-27-2009, 11:55 AM
LMAO :wall:



Sorry man not going to happen
larry79
05-27-2009, 12:02 PM
Come on someone has to have some good macgyver skills :)
Underoath
05-27-2009, 12:39 PM
Buy an Audi ??
DCSGTO
05-27-2009, 04:00 PM
Why don't you just get the ones for the BMW? they use the same bolt pattern as a GTO...
MountainGTO
05-27-2009, 04:07 PM
You don't need to!!!

The link you gave has these wheels for either a Audi OR a BMW

IF YOU SELECT BMW AS THE APPLICATION you will save much hassle

and where are the 9.5s? i only see 18x8.5 and 19x8.5
r0nd3L
05-27-2009, 04:12 PM
It says they come in both bolt patterns, noob.
Flashpoint
05-31-2009, 10:05 AM
It says they come in both bolt patterns, noob.

It says only in 38ET for the BMW bolt pattern.
GroupAwheels.com
06-01-2009, 10:22 AM
Those will not work. You need to buy wheels that are designed specific for the GTO.
r0nd3L
06-01-2009, 10:48 AM
It says only in 38ET for the BMW bolt pattern.

That'll work.
aquariussuperman
06-01-2009, 10:53 AM
You may want to call and ask what's the hub diameter on the V708. The GTO is 69.5mm. so anything larger than that will work fine with a 5x120 pattern. Don't screw around with 5x112.

Unfortunately, the 9.5" rim most likely will rub if you can only get a 45 offset in back. It's going to stick out almost an 1" more than stock.

The 8.5" rim with 48 offset on all 4 corners will work fine if you don't care about being staggered..
WilsonSSS04
06-01-2009, 07:24 PM
I think the problem is the Audi wheel offsets are what works, but the BMW wheel doesn't make a good offset for the GTO.

It's a lose, lose situation for running staggered. Been there, done that.
flink
06-01-2009, 07:41 PM
My questions is how, where, and how much would it be to transform the Audi bolt pattern to our bolt pattern. Any ideas ??

If the wheels' offset is 19mm or more too large (it isn't), use adapters.

Otherwise: redrill the hubs to 5x112 and install new studs.