15 X 10 Welds

[DDS]

Will they fit???

Also is it possible to run a 15x10 rim with a 275 Thompson ??

I figured I would at least need to roll the fenders

Also if you were running a 15 x 10 Weld and a 275 60 15 thompson out back

What would you all run up front???

I was thinking about 2 GTO spares on some bias ply Thompsons. But Im not a big fan of going 130 MPH on a 4 inch wide front rim.

[GulfcoastGoat]

I've got 15x10's with 275/50
Pics- http://www.ls1gto.com/forums/showpost.php?p=421694 7&postcount=721

I managed to put 15x6 on the front, but had to seriously massage the calipers.

[thebassbass]

most run a 15x4 weld with no problem in the front. and most likely you will have to do some work to get the rears to fit the bfh mod and mabe springs and thay should fit.

[fossilblue32]

Alot of people go with 15x8 5.50in. backspacing, would that be a problem?

you wouldn't have to modify anything if you went that size. i most likely will

[lvgto]

15x8 5.5 BS requires pretty much the same as the 15x10 7.5 BS. You have to roll or grind. 15x3.5 1.75 BS fits the front with no modifications.