19/20 iForged Daytona's are ON! Pics inside!

[Dave@EFI]

Well, got them mounted and balanced at Nu Image Motorsports today. Stacy did an excellent job once again. The wheels are a new design from iForged called the Daytona and it is part of their new Xtreme Lip Technology line. This allows for a 2.5" lip in front that will still clear big brakes, and a 4" lip out back which looks FLAT OUT KILLER!

Due to a national back order on the Continental CS2's, I was forced to go with Michelin Pilot Sport Cup 2's which rate superior in every measurable category, but are only available in 265 & 295 widths as opposed to the 275 & 305 widths from Continental. I was concerned with the tires "stretching" over the wheels, but after seeing the mounted product, I am 100% happy with the forced decision....it was a blessing in disguise.

Here are some pics after I slapped them back onto the car:
http://www.efiunlimited.com/gallery/data/502/mediu m/iForged_1.jpg
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06109.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06103.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06106.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06108.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06110.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06111.JPG

[zbaron]

Looks awsome !!!!!!!!!!!!!!!!!

[JCS30TH]

Looks awsome !!!!!!!!!!!!!!!!!

r u kidding? :rolleyes:

[jak112460@aol.com]

Well, got them mounted and balanced at Nu Image Motorsports today. Stacy did an excellent job once again. The wheels are a new design from iForged called the Daytona and it is part of their new Xtreme Lip Technology line. This allows for a 2.5" lip in front that will still clear big brakes, and a 4" lip out back which looks FLAT OUT KILLER!

Due to a national back order on the Continental CS2's, I was forced to go with Michelin Pilot Sport Cup 2's which rate superior in every measurable category, but are only available in 265 & 295 widths as opposed to the 275 & 305 widths from Continental. I was concerned with the tires "stretching" over the wheels, but after seeing the mounted product, I am 100% happy with the forced decision....it was a blessing in disguise.

Here are some pics after I slapped them back onto the car:
http://www.efiunlimited.com/gallery/data/502/mediu m/iForged_1.jpg
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06109.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06103.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06106.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06108.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06110.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06111.JPG

Since you posted a Vette I thought I would show mine off a little. I have Kinesis 19x12.5 on the rear and 18x10 on the front. 345/30/19 out back.

[1stGOAT]

Wild but too wild for me, too low profile etc.... I like the Aeros you had on the car better...... However HOT HOT HOT either way.

[TonnyG]

I miss my Z06, My GTO is cool but I wish I could have kept the Z06 too.

TonnyG

[phobos512]

Those look cool but how can they possibly not rub?

[TrakDay]

Amazing!

[CSiJason]

That is sick...

[TrakDay]

Dave can you e-mail me again with that wheel info? You e-mailed me a while back but I accidentaly deleted it. remember?

[Dbluegoat]

very nice

[Flashpoint]

Well, got them mounted and balanced at Nu Image Motorsports today. Stacy did an excellent job once again. The wheels are a new design from iForged called the Daytona and it is part of their new Xtreme Lip Technology line. This allows for a 2.5" lip in front that will still clear big brakes, and a 4" lip out back which looks FLAT OUT KILLER!

Due to a national back order on the Continental CS2's, I was forced to go with Michelin Pilot Sport Cup 2's which rate superior in every measurable category, but are only available in 265 & 295 widths as opposed to the 275 & 305 widths from Continental. I was concerned with the tires "stretching" over the wheels, but after seeing the mounted product, I am 100% happy with the forced decision....it was a blessing in disguise.

Here are some pics after I slapped them back onto the car:
http://www.efiunlimited.com/gallery/data/502/mediu m/iForged_1.jpg
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06109.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06103.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06106.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06108.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06110.JPG
http://www.efiunlimited.com/gallery/data/502/mediu m/DSC06111.JPG


:hail:

[MTBDOC]

Odd-looking goat!

j/k...nice setup...agree w/ the concern about rubbing, though.

[Go Bucks!]

SWEET!! :hail:

[St.Mary]

Odd-looking goat!

j/k...nice setup...agree w/ the concern about rubbing, though.

Wow, whoever thought a set of rims could make the GTO look so good :)

Nice car :hail: :hail:

[LNWLF]

The aesthetic mods really make your car stand out from the sea of C5's on the road...nice job!

[Dave@EFI]

Thanks gentlemen!

[TrakDay]

check your e-mail. I just e-mailed you!

[Tiresmoker]

Since you posted a Vette I thought I would show mine off a little. I have Kinesis 19x12.5 on the rear and 18x10 on the front. 345/30/19 out back.

the one in the small pic looks better

[sccaGTO]

Daaayyyyuuumm! :thumbs:

[Irakz]

Those wheels are SICK! They look sweet on the vette. Talk about low profile.

[Lithium]

holy shit, you gotta be f-ing kiddin me. that is insane. sorry to say it but, thats about 10x cooler than a GTO

[zgoat]

I miss my Z06, My GTO is cool but I wish I could have kept the Z06 too.

TonnyG

Me t...wait I did keep my ZO6 :) Only kidding Tony, wish you could have kept it...it must have been hard to let go.

AS for EFI...that is the worst looking ZO6 I have EVER seen. I would never base my decision to buy a black ZO6 based off of pics of your car...errrrrrrr...

lol...the wheels look amazing! But, I have come to expect things such as this from you :)

[Dave@EFI]

Thanks for the kind words gang. I will be getting some real pics this weekend if the weather permits.

zgoat, thanks brutha.

[bursty]

those are seriously sick man. Once again, gorgeous Z! you need to change your sig now

[essque]

hands down one of the meanest vettes i've ever seen and like everyone else, i've seen a lot. stunning car. i wonder how punishing the ride is with those.

also, whats up with iForgeds website, they need to update that.

[PHiL2]

Omg HOT!

[TrakDay]

also, whats up with iForgeds website, they need to update that.
Yeah, I think the same wheels have been listed on their site for a few years now. I think it said 2002 in one section when I was looking last!

Dave if you have updated pictures of wheels coming into the market from iForged will you share them please!?

[Dave@EFI]

Thanks gents. The ride actuall y isn't much different at all from my 18/19 set-up. These tires rock though.....I am very pleased with them. Responsive, and great traction.

[Dave@EFI]

Yeah, I think the same wheels have been listed on their site for a few years now. I think it said 2002 in one section when I was looking last!

Dave if you have updated pictures of wheels coming into the market from iForged will you share them please!?

Here are the latest designs from iForged: Click Here (http://www.efiunlimited.com/forum/showthread.php? t=2401)

[TrakDay]

Here are the latest designs from iForged: Click Here (http://www.efiunlimited.com/forum/showthread.php? t=2401)
Thanks, I like those Essen Mesh wheels, Black center for my black car...mmm

[Muff Daddy]

Those wheels look killer, along with the rest of the car!!