Anybody got Hot Wheels on their goat?

[Lothar]

http://www.discounttire.com/dtcs/findWheelByBrandD etail.do?rcz=77081&rc=TSWINT&wd=17&pc=57191&typ=Car%2FMinivan&rw=8&bp=5-120.6

I love the look of these, but I'm not sure how they'd go on the goat. I'm really curious how they'd look. I may try a chop later:

http://www.houstongoatherd.org/coppermine/albums/u serpics/10012/hotsix.p.ang.jpg

[Striped04]

5x120.65 is the F-body bolt pattern, which I think would work just fine on our cars as long as the offset was o.k. I also think that wheel would look pretty good. It looks kind of old school with a modern design.

[Lothar]

i didnt see them for a gto it shows their for a mini van?

They're all SAE sizes, but the 5x120.65 is almost the GTO's bolt pattern.

It says the backspacing on the 17x9 is 45mm.

I can't find the backspacing for the 17x8.

[Striped04]

45mm on the rear would work but you may need a fender roll. I'll bet the fronts are 40mm.

[24v]

The 17x8's will not work, they are a 0 offset.