Wheel size question

[Bucmiester]

I ordered a new set of wheels and tires but the more I read the more unsure of the size I got.
I ordered a set of
Front wheels Bolt pattern 5x120 19x8 with 43 offset
Tires 245/35/19

Rear wheels bolt pattern 5x120 19x9.5 with 50 offset
Tires 275/30/19

Will these fit?

[Bucmiester]

Hope someone answers this soon. If needed I have to correct the size before he has them made. I'm more comcerned with the front offset over anything else.

[jpoole]

They look very much like those of the ROH that are suppose to fit fine, ROH are 41 and 51 I think.

[GMMillwright]

I think they'll fit.

[Bucmiester]

Thanks guys. I was getting a little worried.

[Trapper]

Let us know what rear tire you go with, and whether you have to roll or grind the rear fender lips any with the 50 offset.

I went with 17x9.5 with a 55 offset on the rear, using BFG KDW 275/40-17's. They are supposed to run wider than some other brands due to a more square shoulder. I don't get any rub on the fender lips, but get a slight rub on the driver's side inner fender. I am currently "delicately contouring" the inner fender with a BFH to try to eliminate that rub. LOL

[sccaGTO]

The choice of tire is gona be the big factor. The Toyo T1-R is a tire well known to run narrow. That means it has a more rounded shoulder. At the worst, a little outer fender rolling might be required.

[24v]

I am currently "delicately contouring" the inner fender with a BFH to try to eliminate that rub. LOL
:gr_jest: