Anyone know who makes these wheels?

[UMgoat]

hey guys, id like to see more of this wheel http://www.pfyc.com/store/merchant.mv?Screen=PROD&Store_Code=PFYC&Product_Code=GT4007&Product_Count=11&Category_Code=GTSUSP
anyone know any info on em, thanks

[brad@modern-muscle]

They are made by Intro...I believe these are the Intro Matrix wheels. If not they are the Intro Vistas. Go to Arrowhead Performance which is listed to your left and click on wheels and there you go.

[Liquorice]

Intro Wheels those are Vistas ...same as mine.

You can buy them from ArrowHead Performance.
That's a picture of the "Tiger" Howie's Car.

[cjlannoy]

Those wheels have problems with rain collecting in the valley between the outside and inside of the wheel and will cause bad vibration due to balancing issues. (unless you don't drive your car in the rain)
I like the brakes myself.

[UMgoat]

Thanks guys, gorgeous

[UMgoat]

Those wheels have problems with rain collecting in the valley between the outside and inside of the wheel and will cause bad vibration due to balancing issues. (unless you don't drive your car in the rain)
I like the brakes myself.
Not sure i understand what you mean, water gets trapped in the lip between the spokes and the edge?

[cjlannoy]

Not sure i understand what you mean, water gets trapped in the lip between the spokes and the edge?
see my attached image.

[UMgoat]

see my attached image.
Thanks man, i was just searching the forum for the problem and must admit i am thoroughly disgusted with the initial response given by Intro. I dont know if the problems were resolved or not, regardless i refuse to buy a set of wheels from people like this.

This certainly is a safety/liability issue.