LS1GTO Forums banner

Formato Ported LS2 Intake, Speed Inc Billet Fuel Rails, Billet Oil Cap

1K views 10 replies 4 participants last post by  BlackPearl 
#1 · (Edited)
Formato Ported LS2 Intake = SOLD
On the car for approx 25k miles. There are three bolt holes that were damaged when I initially installed it. However, this has never caused me problems or leaked and was on my turbo car making over 500rwhp.

LS2 Speed Inc billet rails with fittings and lines from professional products = SOLD
The rails are from speed inc, the lines and fittings are from the professional intake I swapped. I have no idea how the feed line connects to the hard line though I'll be glad to include a hardline to 6an adapter. I say this because as you'll see in the pics that line is long but there are pics on how it looks installed on this forum. Also, the reducer bushing has an open 1/8th port that would be ideal for a fuel pressure gauge. Please note you will need a plug for this end of the rail because the fitting is an open reducer bushing if you don't use a fuel gauge.

Billet Oil Cap = SOLD








 
See less See more
8
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top