LS1GTO Forums banner

�� All Injectors on sale! (FAST, Siemens, SVO) ��

47K views 273 replies 103 participants last post by  Hinson Motorsports 
#1 · (Edited)
•• All Injectors on sale! (FAST, Siemens, SVO) •• HINSON Motorsports

All of our Fuel Injectors are on sale!
Image uploading. Refresh page to view

Most injectors will max out at 80% duty cycle and this is the accepted industry standard. After you install heads, cam, intake, your sucking in alot more air and your motor needs more fuel! Your injectors will be unpredictable when maxed out and you do not want to be running out of fuel at 6000+ rpm. If you have any questions about which injector size or accessories you may need, feel free to ask them in this thread. You can reach us at 205-267-6387 or seth@hinsonsupercars.com


High Impedance

FAST 33lb Injectors LS2
Part# 30332-8

DeatschWerks 35lb Injectors LS1
Part# 18U-01-0035-8

FAST 36lb Injectors LS1
Part# 303608

DeatschWerks 39lb Injectors LS1
Part# 18U-01-0039-8

FAST 39lb Injectors LS3/LS7
Part# 30397-8

Bosch 42lb Injectors LS1
Part# 0280155968

DeatschWerks 42lb Injectors LS1
Part# 18U-01-0042-8

DeatschWerks 42lb Injectors LS2
Part# 13U-00-0042-8

DeatschWerks 42lb Injectors LS3/LS7
Part# 16U-00-0042-8

FAST 46lb Injectors LS2
Part# 30462-8

DeatschWerks 50lb Injectors LS1
Part# 18U-01-0050-8

DeatschWerks 50lb Injectors LS2
Part# 17U-00-0050-8

DeatschWerks 50lb Injectors LS3/LS7
Part# 16U-00-0050-8

FAST 50lb Injectors LS3/LS7
Part# 30507-8

FAST 55lb Injectors LS1
Part# 305508

FAST 57lb Injectors LS2
Part# 30572-8

DeatschWerks 60lb Injectors LS1
Part# 18U-01-0060-8

DeatschWerks 60lb Injectors LS2
Part# 17U-00-0060-8

FAST 60lb Injectors LS1
Part# 306008

Siemens 60lb Injectors LS1 - EV1
Part# 107961

Siemens 60lb Injectors LS1 - EV6
Part# 108191

DeatschWerks 65lb Injectors LS3/LS7
Part# 16U-00-0065-8

FAST 65lb Injectors LS3/LS7
Part# 30657-8

DeatschWerks 72lb Injectors LS2
Part# 17U-00-0072-8

DeatschWerks 78lb Injectors LS1
Part# 18U-01-0078-8

Siemens 80lb Injectors LS1 - EV1
Part# 110324

Siemens 80lb Injectors LS1 - EV6
Part# 109991

FAST 85lb Injectors LS3/LS7
Part# 30857-8

DeatschWerks 88lb Injectors LS1
Part# 18U-01-0088-8

DeatschWerks 90lb LS3/LS7 Injectors
Part# 16U-00-0090-8

DeatschWerks 95lb Injectors LS2
Part# 17U-00-0095-8


Low Impedance

Lucas 120lb Injectors LS1

Bosch 160lb Injectors LS1


Fuel components you may need for your build

Caspers Electronics Injector Adapter EV1 to EV6
Part# 109076
LS2/LS3/LS7 Car using an LS1 Injector

Caspers Electronics Injector Adapter EV6 to EV1
Part# 109077
LS1 Car using an LS2/LS3/LS7 Injector

FAST Injector Harness Adapters - EV1 to EV6 (8 Pack)
LS2/LS3/LS7 Car using an LS1 Injector

FAST Injector Harness Adapters - EV6 to EV1 (8 Pack)
LS1 Car using an LS2/LS3/LS7 Injector

FAST Fuel Injector Spacer Kit
Makes an LS3/LS7 Injector have the same height as an LS2 Injector

Katech Fuel Rail Spacer LS2
LS1 Injector in an LS2 Manifold and Fuel Rail
 
See less See more
Sensitive content, not recommended for those under 18
1
#2 ·
Are the 83's flowmatched?
 
#3 ·
I'll be very interested in real world results with the new 83's and see what does and does not change from the 60's (other than raw IFR's) If these suckers will idle with a stock LS1, we have a winner, and I could knock my fuel pressure waaayyy down.
 
#154 ·
yeah im at 90% on my 60's, time for an upgrade, but I can't find any info anywhere on peoples results, tuning specs, etc. IFR can be calculated, but all the fun stuff like minimum pulse width etc...not so much
No sir.

We have not tested these yet. With these being brand new, there isn't much feedback yet.
Without having to dig into this thread, has this been answered yet? Thinking of selling off my 60's and moving to the 83's.
 
#4 ·
yeah im at 90% on my 60's, time for an upgrade, but I can't find any info anywhere on peoples results, tuning specs, etc. IFR can be calculated, but all the fun stuff like minimum pulse width etc...not so much
 
#6 ·
Too bad its a good price! Thanks for the update.
 
#7 · (Edited)
what do i need to make ls1 injectors work on an ls2? i know i need the connector but what about the height issue? thanks
or should i just buy ls2 specific injectors?
 
#13 ·
They are high-z, so they should work just fine.

Id like to get some, just to see how well they idle and work.
 
#15 ·
If I want to use the siemens 60# for my LS2, do I simply buy the EV6 or do I need the adapter as well?
 
#19 ·
Yes, they will. Although that's a little large for your NA motor. Some 36 or 42's would work great for you.

05 with a Maggie ... I believe they use LS1 style injectors even on the LS2, correct? Looking to upgrade from the SVO 42#'ers on there now since I have the blower off. Just want to get the right part before ordering.
Yes, they use the SVO 42's. I would keep the LS1 style injector on there and just use the Injector Harness Adapters. If you need more fuel, I would recommend the 60's.
 
#22 ·
can we get free shipping? :idea:
 
#25 ·
Seth,
Will the 39lb (30397-1) work for my setup be sufficient. I have the SVO 39lb blue tops and they wash the sides of the intake ports in these L92 heads, cone seems to wide I and guessing.
 
#31 ·
Are the Siemens 60lbs taller than the stock LS2? Would I need a fuel rail adapter kit? i.e. spacers
 
#34 ·
Ordered some 60#'s... D1...here I come.... :)
 
#38 ·
What do you recommend for my LS2 with CAM and bolt ons?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top