As a welder I am curious if there is any interest in an H for the GTO? My thought would be to offer both aluminized steel and S.S steel with TIG welding crossovers and offer both a bolt in with flanges as well as weld and/or clamp in style in 2.5" and 3"
Just curious about the level of interest in this. Seems Stolen Fox dropped off.
Not to be a downer, as you've got a good idea, but you'd need to either become a sponsor or reach out to an existing one to see if they would sell your H-pipes on here. Site owners won't allow you to sell these without going down one of these routes first.
The cylinder heads became deformed because the air filter was so dirty they couldnt handle all the build up of air and oil coming through the air filter and the throttle body so i tried replacing the air tube with a cold air intake and i think the extra power blew out the cylinder heads and they crashed through valley pan into the crank. Then the crank spun hard and threw the pistons up to hard to cause a misfire
I'm just going to go ahead and close this till the OP can consider if the choices he has moving forward will make this a viable venture. The reason SF dropped off is because he needed to become a sponsor after the site changed hands. He decided to hang up his hat.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.