hey guys im looking to get a new set of rims for my car and im kinda interested about how a set of corvette rims would look on a gto. if anybody has corvette rims on their gtos could you please post a pic of it
Funny... I'm doing this to mine right now. There are a few on here who have done it and you can see their write up/ pics if you search for their threads. Looks good
I dunnow where is those pics from? The car came from Indiana. What are the tires on the front kuhmo? I can't tell from my phone but I have had it since July and guy I got it from had it since dec maybe
I bought this car like this. So I am not sure what Corvette these wheels are off of but thy are 18s in the front and 19s on the rear. Sorry its not a very good picture of it.
Sent from my SAMSUNG-SGH-I777 using AutoGuide.Com Free App
Just a heads up: The local guys around me, using true C5 and C6 and not replicas, had to do quite a bit to make them work. They ran spacers, and to get the spacers to work they had to get the ARP extended studs. And had to cut fenders on top of that. Not a huge deal, just some extra cost involved that you should be aware of.
Yeah when I was looking at the c6 z06 rims all of the offsets required the use of a spacer. I was told spacers are not the best idea because they are known to cut the studs like butter, but I have met plenty of guys who run big off set rims with no spacers and they have had no problems. I have a machine shop too, so I was even willing to make the spacers, but then I found the replicas and just went with those instead.
Nope, because of the high offset I have quite a bit of room to the fender so that's ok. It looks to be real close on the inside fender, but haven't had any problems in the past 8 months and some 8k miles of hard driving and track launching.