#1
·
Dec 4, 2012
Did you have to do any clearance mods to get them to fit? I just ordered mine and want to know what im in for here.
#2
·
Dec 5, 2012
Not sure what that backspacing works out to be, however if it is between ET45 and ET50 it should fit with possibly only rolling of the outside guards.
#3
·
Dec 5, 2012
I've run that exact set up
I didn't have any issues. But im rolled with air bags
#4
·
Dec 5, 2012
I like more back spacing but with a small tire they should work.You can get a 275 on our 10 inch wheel,if its not to late we can help you out
#5
·
Dec 5, 2012
I run a 275/60/15 on a 10inch wheel.
Just had to grind the caliper bolt, bend the brake line. Also cut some of the plastic that is behind the tires as it would have rubbed and cut the fenders. I am running 0 drop springs with drag bags. Stock shocks with 60k miles on them, stock gears, axles and stubs. Cut a 1.41 off the footbrake.
#6
·
Dec 5, 2012
I now run a 15x8 with a 6.5 BS with 27x11.5-15s no rub all tucked in
#7
·
Dec 5, 2012
Thats what i run, and you absolutely need air bags. They stick out a bit and are tall.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.