05-06 GTO Half Shaft up-grade kit.
04 half shafts will not work (read at bottom)
Everything you need in a DIY kit to up-grade your own half shafts to the 930 cv's with chromoly cages.
The Porsche 930 CV joints are thicker than the stock CV joints, the thicker 930 cv joints help distribute the load better.
The stock cages are the weak links, the cages in our 930 cv joints are made from 4130 chromoly and are much stronger than the stock ones.
Just so happens that the factory CV joints are very similar to the 930 CV joints and are interchangeable on your half shaft axles.
All you need to do is take off the stock cv joints and boots from your stock half shafts and install our CV joints and boots right onto your stock axles.
Don’t worry, it will all fit with out any problems.
It's a fairly easy job and usually takes a good part of an afternoon.
I've even made a couple of video's so you can see what your getting into.
Assembly video Part 1
Assembly video Part 2
[/URL]
Here is what you get:
All this for $365.
If you would like to purchase the up-grade kit, just go to our web site at www.shop.gforce1320.com or you can just click on the photo.
If you don't want to mess with putting the up-grade kit on your self, you can ship us your stock half shafts and we'll do it for you for $465. plus a little return shipping.
Sometimes we have half shafts already up-graded that we can swap out for you. You would have to pay a $150. deposit that you would get back when we get your half shaft cores.
04 Half shafts will not work.
The 04 Half shafts look the same but will not work.
The 04 axles have a smaller outer splined end and a really odd ball cv joint with smaller internals that the inner cv joint. The 04 shafts will have a part # AB2704 92067184
The 04 outer shaft dia is right around 1.1" and the 05-06 dia is 1.25"
The 05-06 half shafts will interchange with the 04's, they have the same bolt pattern and are the same length. They bolt right in.
Thanks
Chris @ Gforce
GFORCE1320@gmail.com
04 half shafts will not work (read at bottom)
Everything you need in a DIY kit to up-grade your own half shafts to the 930 cv's with chromoly cages.
The Porsche 930 CV joints are thicker than the stock CV joints, the thicker 930 cv joints help distribute the load better.
The stock cages are the weak links, the cages in our 930 cv joints are made from 4130 chromoly and are much stronger than the stock ones.
Just so happens that the factory CV joints are very similar to the 930 CV joints and are interchangeable on your half shaft axles.
All you need to do is take off the stock cv joints and boots from your stock half shafts and install our CV joints and boots right onto your stock axles.
Don’t worry, it will all fit with out any problems.
It's a fairly easy job and usually takes a good part of an afternoon.
I've even made a couple of video's so you can see what your getting into.
Assembly video Part 1
Assembly video Part 2
Here is what you get:
- 4 Porsche 930 cv joints w/chromoly cages
- 4 Porsche 930 Boots
- New Boot clamps
- 4 Porsche 930 Boot flanges
- 4 Porsche 930 cv back covers
- 4 New axle retaining clips
- 1 Bolt set, qty of 24 bolts (12.9 Grade, Black Oxide)
- CV grease for all 4 cv joints
All this for $365.
If you would like to purchase the up-grade kit, just go to our web site at www.shop.gforce1320.com or you can just click on the photo.
If you don't want to mess with putting the up-grade kit on your self, you can ship us your stock half shafts and we'll do it for you for $465. plus a little return shipping.
Sometimes we have half shafts already up-graded that we can swap out for you. You would have to pay a $150. deposit that you would get back when we get your half shaft cores.
04 Half shafts will not work.
The 04 Half shafts look the same but will not work.
The 04 axles have a smaller outer splined end and a really odd ball cv joint with smaller internals that the inner cv joint. The 04 shafts will have a part # AB2704 92067184
The 04 outer shaft dia is right around 1.1" and the 05-06 dia is 1.25"
The 05-06 half shafts will interchange with the 04's, they have the same bolt pattern and are the same length. They bolt right in.
Thanks
Chris @ Gforce
GFORCE1320@gmail.com