Abear Enclosed Coil rocker cover GP/Sale is here!!
*UPDATE* This GP event will be over tomorrow Tuesday the 22nd at 11:59PM. Please submit all orders by that time.
For the next 7 days we'll be offering our award winning Enclosed Coil rocker covers to LS2GTO.com members for $495, thats $100 off the regular sale price.
Our GM SEMA 2007 Design Award for Best New Accessory.
Our rocker covers are a 2-piece design that hides your ignition coils while allowing you to use aftermarket rocker arms, and stock length spark plug wires. They can also be customized with any combination of polishing, engraving, and anodizing.
They will clear your brake booster thanks to a form fitting cutout.
Also, during the next 7 days we will be offering our unique fuel rails for an introductory price of $125, $25 off of the regular sale price.
Pictured on a C6 Corvette with Abear rocker covers.
These fuel rails are unique in that they have a wing section specifically designed to hide your injectors, wiring, and even vacuum lines leaving a much cleaner looking engine.
The Abear fuel rails are manufactured from aircraft grade aluminum and utilize a 5/8" ID thru hole which ensures enough fuel for well over 1000 HP.
To place an order or ask a question please contact us at 425-493-2519, or 425-780-8610.
Thanks,
Last edited by Ryan@Abear : 01-21-2008 at 03:35 PM.
Alpine IVA-W505 Viper alarm w/window roll up & down & prox sensor K&N cai Kook's LT's catted mids Cutouts Borla JHP door lock Billet shifter 06 radio controls Hotchkis bars Pedders Track II SLP skid plate Forged 427 ETP 245 62cc heads 9.8:1 Wiseco pistons Chromed TVS2300 17 lbs boost Ram twin Detroit True Trac SCSS 3 pillar & Dash pod Hendrix-Engineering wires Custom mini tub designed by LSPWR with 315 dr's on factory 18's
Thats a steal on those fuel rails, I paid $170 for my FAST rails and Im trying to think of something to cover them Good work as always Abear!
Ryan, I have to get a few things in order but I will be calling you by the end of this week.
The fuel rails are very new and have only been fitted to a C6 corvette and possibly an f-body (I have to check), but there should be no issues fitting the LS2 GTO. The rails can be hooked up to the stock fuel feed line with the correct fittings. PM me for a complete list of the fittings used in our C6 install.
As for the engraving, we can use just about any image type or even just a concept if you have one already. Give me a call on my cell or PM me if you need to discuss the engraving in greater detail.
The GP/Sale price is for our Enclosed Coil rocker covers, which are the 2-piece units that hide your coils, will be going on for 7 days. $495 would be for a standard machined set, engraving($75) and polishing($50) as well as anodizing($75) are available.
Location: ChimChim is in the Vette's trunk in Mount Airy, MD
Posts: 4,883
Offline
Quote:
Originally Posted by Ryan@Abear...
GP price for rocker covers with engraving and shipping is $595.
I don't know if the rails will clear a Maggie or not. Once we know we'll have them available clearanced (if necessary).
Let me know if you need someone to find out about Maggie fitment and willing to investigate if you send me a set. I highly doubt the rails will work though. The maggie rails have weird mounts and a crossover that runs from the front end of the passenger side rail, under the Maggie to a port on the bottom side of the drivers side rail.
__________________
-Bill
2009 Black 3LT Z51 Corvette Coupe LS3 6spd manual
2005 MBM M6 GTO - SOLD!
I highly doubt the rails will work though. The maggie rails have weird mounts and a crossover that runs from the front end of the passenger side rail, under the Maggie to a port on the bottom side of the drivers side rail.
Ewww, yuck. I never looked that closely at one. Might take more modification than originally expected....
Ryan couldn't be any better.....Outstanding service....Ryan has been great to work with....great new accessory!!!!!
Thanks guys We try.
Quote:
How many we up to now ?
I think we've gotten either 10 or 11 orders so far.
This rare opportunity will be over in less than 36 hours so if you haven't already, get 'em $100 off while you can. We do not have GP events like this very often.
I talked with Abear (Ryan) a few times in the past about a better price, and they are pretty stiff on giving discounts...so if you want these anytime in the near future I wouldn't hesitate to order now, Im willing to bet you wont do better.
I think we've gotten either 10 or 11 orders so far.
This rare opportunity will be over in less than 36 hours so if you haven't already, get 'em $100 off while you can. We do not have GP events like this very often.
Ryan....any word on that little bit of kickback for helping to generate some interest and helping people make up their mind with the pics I posted?
__________________
05 Torrid Red M6 GTO - Mods.....so far.
Full Pedders Suspension; Magnaflow Catback; SLP LT's w/catted mids, 232/236 .600"/.600" 112 LSA cam; FAST 90; AFR Heads; Comp 921 Springs, SLP UD Pulley, Volant CAI, Custom tune by NicD, JHP gauges, LS7 Clutch, Classic Tube Clutch Line and Remote Bleeder, GMM Race Shifter, Optima Red Top, Maverick Man Spoiler, 3.91's, cryo stubs, Harrop diff cover, 930 CV's & Upgraded Half-Shafts, HIDs
Location: ChimChim is in the Vette's trunk in Mount Airy, MD
Posts: 4,883
Offline
Quote:
Originally Posted by Ryan@Abear...
Thanks guys We try.
I think we've gotten either 10 or 11 orders so far.
This rare opportunity will be over in less than 36 hours so if you haven't already, get 'em $100 off while you can. We do not have GP events like this very often.
+1 guys. You aren't gonna get a better deal than this.
2005 GTO Owner
Good work as always Abear!
We try.
