All Injectors on sale! (FAST, Siemens, SVO) - LS1GTO.com Forums

Vendors


Go Back   LS1GTO.com Forums > For Sale > Sponsor's Sales and Group Purchases

Reply
 
Thread Tools Rate Thread
Old 04-08-2009, 09:19 AM   #1
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
All Injectors on sale! (FAST, Siemens, SVO) HINSON Motorsports

All of our Fuel Injectors are on sale!

Most injectors will max out at 80% duty cycle and this is the accepted industry standard. After you install heads, cam, intake, your sucking in alot more air and your motor needs more fuel! Your injectors will be unpredictable when maxed out and you do not want to be running out of fuel at 6000+ rpm. If you have any questions about which injector size or accessories you may need, feel free to ask them in this thread. You can reach us at 205-267-6387 or seth@hinsonsupercars.com


High Impedance

FAST 33lb Injectors LS2
Part# 30332-8

DeatschWerks 35lb Injectors LS1
Part# 18U-01-0035-8

FAST 36lb Injectors LS1
Part# 303608

DeatschWerks 39lb Injectors LS1
Part# 18U-01-0039-8

FAST 39lb Injectors LS3/LS7
Part# 30397-8

Bosch 42lb Injectors LS1
Part# 0280155968

DeatschWerks 42lb Injectors LS1
Part# 18U-01-0042-8

DeatschWerks 42lb Injectors LS2
Part# 13U-00-0042-8

DeatschWerks 42lb Injectors LS3/LS7
Part# 16U-00-0042-8

FAST 46lb Injectors LS2
Part# 30462-8

DeatschWerks 50lb Injectors LS1
Part# 18U-01-0050-8

DeatschWerks 50lb Injectors LS2
Part# 17U-00-0050-8

DeatschWerks 50lb Injectors LS3/LS7
Part# 16U-00-0050-8

FAST 50lb Injectors LS3/LS7
Part# 30507-8

FAST 55lb Injectors LS1
Part# 305508

FAST 57lb Injectors LS2
Part# 30572-8

DeatschWerks 60lb Injectors LS1
Part# 18U-01-0060-8

DeatschWerks 60lb Injectors LS2
Part# 17U-00-0060-8

FAST 60lb Injectors LS1
Part# 306008

Siemens 60lb Injectors LS1 - EV1
Part# 107961

Siemens 60lb Injectors LS1 - EV6
Part# 108191

DeatschWerks 65lb Injectors LS3/LS7
Part# 16U-00-0065-8

FAST 65lb Injectors LS3/LS7
Part# 30657-8

DeatschWerks 72lb Injectors LS2
Part# 17U-00-0072-8

DeatschWerks 78lb Injectors LS1
Part# 18U-01-0078-8

Siemens 80lb Injectors LS1 - EV1
Part# 110324

Siemens 80lb Injectors LS1 - EV6
Part# 109991

FAST 85lb Injectors LS3/LS7
Part# 30857-8

DeatschWerks 88lb Injectors LS1
Part# 18U-01-0088-8

DeatschWerks 90lb LS3/LS7 Injectors
Part# 16U-00-0090-8

DeatschWerks 95lb Injectors LS2
Part# 17U-00-0095-8


Low Impedance

Lucas 120lb Injectors LS1

Bosch 160lb Injectors LS1


Fuel components you may need for your build

Caspers Electronics Injector Adapter EV1 to EV6
Part# 109076
LS2/LS3/LS7 Car using an LS1 Injector

Caspers Electronics Injector Adapter EV6 to EV1
Part# 109077
LS1 Car using an LS2/LS3/LS7 Injector

FAST Injector Harness Adapters - EV1 to EV6 (8 Pack)
LS2/LS3/LS7 Car using an LS1 Injector

FAST Injector Harness Adapters - EV6 to EV1 (8 Pack)
LS1 Car using an LS2/LS3/LS7 Injector

FAST Fuel Injector Spacer Kit
Makes an LS3/LS7 Injector have the same height as an LS2 Injector

Katech Fuel Rail Spacer LS2
LS1 Injector in an LS2 Manifold and Fuel Rail

Last edited by Hinson Motorsports; 03-25-2014 at 10:44 AM.
  Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 04-08-2009, 12:49 PM   #2
Steel Chicken
L33T IT Direktor, Excel PhD
 
Steel Chicken's Avatar
 
2004 GTO Owner

Join Date: Dec 2004
Location: Magrathea
Posts: 19,706
Premium Member


Offline
Are the 83's flowmatched?
__________________
2004 GTO, Stock LS1 internals, donkey dick cam, mega-ultron space heater @ 14PSI, ETP heads, exhaust thingies and other stuffs. RAWR.


Quote:
Justice is swift and unfair in the eyes of those who don't know shit. - tmiller

  Reply With Quote Quick reply to this message
Old 04-08-2009, 01:32 PM   #3
mistermike
10-4
 
mistermike's Avatar
 
2004 GTO Owner

Join Date: Dec 2003
Location: Cleveland
Posts: 20,111
GKPW52

Offline
I'll be very interested in real world results with the new 83's and see what does and does not change from the 60's (other than raw IFR's) If these suckers will idle with a stock LS1, we have a winner, and I could knock my fuel pressure waaayyy down.
__________________
http://i67.photobucket.com/albums/h306/MikeStainlessWorks/SigPicAniSm.gif
World's First Twin Screw Pontiac GTO

Blown H/C 408 and other stuff. Billet tires. Plasti Dip tints. Stage 3 keyboard. /////.
2008 HHR SS tweaked
2003 CTS w/ dead hooker in spacious trunk
fquick
  Reply With Quote Quick reply to this message
Old 04-08-2009, 01:33 PM   #4
Steel Chicken
L33T IT Direktor, Excel PhD
 
Steel Chicken's Avatar
 
2004 GTO Owner

Join Date: Dec 2004
Location: Magrathea
Posts: 19,706
Premium Member


Offline
yeah im at 90% on my 60's, time for an upgrade, but I can't find any info anywhere on peoples results, tuning specs, etc. IFR can be calculated, but all the fun stuff like minimum pulse width etc...not so much
  Reply With Quote Quick reply to this message
Old 04-08-2009, 01:55 PM   #5
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by Steel Chicken...View Post
Are the 83's flowmatched?

No sir.

We have not tested these yet. With these being brand new, there isn't much feedback yet.
  Reply With Quote Quick reply to this message
Old 04-08-2009, 01:57 PM   #6
Steel Chicken
L33T IT Direktor, Excel PhD
 
Steel Chicken's Avatar
 
2004 GTO Owner

Join Date: Dec 2004
Location: Magrathea
Posts: 19,706
Premium Member


Offline
Too bad its a good price! Thanks for the update.
  Reply With Quote Quick reply to this message
Old 04-08-2009, 04:14 PM   #7
sulldaddy
awesome at spending money
 
sulldaddy's Avatar
 
2006 GTO Owner

Join Date: Jun 2008
Location: winfield, illinois
Posts: 943


Offline
what do i need to make ls1 injectors work on an ls2? i know i need the connector but what about the height issue? thanks
or should i just buy ls2 specific injectors?
__________________
rear mount intercooled 76mm turbo
tial WG and BOV
stock ls2
fast 57 lbs injectors
lingenfelter fuel pump kit
ais meth kit
Built TH400
3600 stall
T-brake msd 2-step
and a bunch of other stuff

http://www.ls1gto.com/forums/showthread.php?t=382108 (dyno vid and results)



Last edited by sulldaddy; 04-08-2009 at 04:20 PM.
  Reply With Quote Quick reply to this message
Old 04-08-2009, 06:26 PM   #8
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by sulldaddy...View Post
what do i need to make ls1 injectors work on an ls2? i know i need the connector but what about the height issue? thanks
or should i just buy ls2 specific injectors?

You will need spacers and longer bolts.
  Reply With Quote Quick reply to this message
Old 04-08-2009, 06:39 PM   #9
Perdieu
da slow kid of the bunch
 
Perdieu's Avatar
 
2004 GTO Owner

Join Date: Jan 2005
Location: Blue Springs Mo.
Posts: 3,885


Offline
Send a message via AIM to Perdieu
Quote:
Originally Posted by Seth@HSC...View Post
No sir.

We have not tested these yet. With these being brand new, there isn't much feedback yet.


LOL I'll trade you my 60's for a set and I'll give you all the feed back you need both street and track results
__________________
I Built it !
I Enjoyed it
I Sold it!
  Reply With Quote Quick reply to this message
Old 04-08-2009, 06:57 PM   #10
V3NOM GTO
building a "Street" Car
 
V3NOM GTO's Avatar
 
2004 GTO Owner

Join Date: Sep 2008
Location: OKC
Posts: 992


Offline
What is stock on LS1.
__________________
10.47@135 on a 300 shot Stock bottem end LS1
  Reply With Quote Quick reply to this message
Old 04-08-2009, 07:06 PM   #11
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by V3NOM GTO...View Post
What is stock on LS1.

28.8
  Reply With Quote Quick reply to this message
Old 04-10-2009, 05:40 AM   #12
BubbaDuss
Mod-Anonymous Attendee
 
BubbaDuss's Avatar
 
2004 GTO Owner

Join Date: Feb 2007
Location: Coral Springs, FL
Posts: 1,439


Offline
the 83's work with the stock ECM? or is there a modulator or 3rd party driver setup?
__________________
I have no relevant information on this subject at this time...
  Reply With Quote Quick reply to this message
Old 04-10-2009, 05:44 AM   #13
Steel Chicken
L33T IT Direktor, Excel PhD
 
Steel Chicken's Avatar
 
2004 GTO Owner

Join Date: Dec 2004
Location: Magrathea
Posts: 19,706
Premium Member


Offline
Quote:
Originally Posted by BubbaDuss...View Post
the 83's work with the stock ECM? or is there a modulator or 3rd party driver setup?

They are high-z, so they should work just fine.

Id like to get some, just to see how well they idle and work.
  Reply With Quote Quick reply to this message
Old 04-10-2009, 05:46 AM   #14
BubbaDuss
Mod-Anonymous Attendee
 
BubbaDuss's Avatar
 
2004 GTO Owner

Join Date: Feb 2007
Location: Coral Springs, FL
Posts: 1,439


Offline
Quote:
Originally Posted by Steel Chicken...View Post
They are high-z, so they should work just fine.

Id like to get some, just to see how well they idle and work.

Idle? who does that anymore? that's so 2006...
  Reply With Quote Quick reply to this message
Old 04-10-2009, 06:03 AM   #15
StreetSleepR
Welcome to the Dark Side
 
StreetSleepR's Avatar
 
2005 GTO Owner

Join Date: Sep 2006
Location: AZ
Posts: 437


Offline
If I want to use the siemens 60# for my LS2, do I simply buy the EV6 or do I need the adapter as well?
__________________

05 PBM A4 GTO ---> now a CGM...no, not cyclone... CYBER.....
69 Impala 2DR Custom 406SBC
66 Caprice 2DR 396BBC/325HP
70 Cyclone Spoiler 429CJ/370HP

Gone but not forgotten:
95 Mustang GT Convert 347SBF
70-1/2 RS/SS Camaro Split Bumper
67 Chevelle
  Reply With Quote Quick reply to this message
Old 04-10-2009, 08:04 AM   #16
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by BubbaDuss...View Post
the 83's work with the stock ECM? or is there a modulator or 3rd party driver setup?

Yes, they are high impedance.

Quote:
Originally Posted by StreetSleepR...View Post
If I want to use the siemens 60# for my LS2, do I simply buy the EV6 or do I need the adapter as well?

Yes, you simply choose the EV6 connection. You won't need to buy a harness adapter. These are in stock.
  Reply With Quote Quick reply to this message
Old 04-11-2009, 10:56 AM   #17
GOGOGTO
04 N/A M6 P.B-11.877@117mph
 
GOGOGTO's Avatar
 
2004 GTO Owner

Join Date: May 2006
Location: Plant City FL.
Posts: 1,636


Offline
My stock injectors are maxed out. I have a Heads/Cam LS1. Will the FAST 60# injectors plug right in?
__________________
2004 PBM M6

Naturally Aspirated LS1 465rwhp & 421rwtq
Mods: A Crap Load of Stuff...

Last edited by GOGOGTO; 04-11-2009 at 02:30 PM.
  Reply With Quote Quick reply to this message
Old 04-12-2009, 02:53 PM   #18
8ball
Registered User
 
2005 GTO Owner

Join Date: Mar 2005
Location: Antartica
Posts: 7,146


Offline
05 with a Maggie ... I believe they use LS1 style injectors even on the LS2, correct? Looking to upgrade from the SVO 42#'ers on there now since I have the blower off. Just want to get the right part before ordering.
  Reply With Quote Quick reply to this message
Old 04-14-2009, 07:53 AM   #19
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by GOGOGTO...View Post
My stock injectors are maxed out. I have a Heads/Cam LS1. Will the FAST 60# injectors plug right in?

Yes, they will. Although that's a little large for your NA motor. Some 36 or 42's would work great for you.

Quote:
Originally Posted by 8ball...View Post
05 with a Maggie ... I believe they use LS1 style injectors even on the LS2, correct? Looking to upgrade from the SVO 42#'ers on there now since I have the blower off. Just want to get the right part before ordering.

Yes, they use the SVO 42's. I would keep the LS1 style injector on there and just use the Injector Harness Adapters. If you need more fuel, I would recommend the 60's.
  Reply With Quote Quick reply to this message
Old 04-14-2009, 11:13 AM   #20
slowgoat
Bann3d
 
slowgoat's Avatar
 
2005 GTO Owner

Join Date: Apr 2006
Location: Somewhere in KS
Posts: 5,985


Offline
Just ordered a set of 57's for the new set-up

Thank you seth..
  Reply With Quote Quick reply to this message
Old 04-14-2009, 12:26 PM   #21
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by slowgoat...View Post
Just ordered a set of 57's for the new set-up

Thank you seth..

Thanks slowgoat. They should be there Thursday.
  Reply With Quote Quick reply to this message
Old 04-15-2009, 01:21 PM   #22
StreetSleepR
Welcome to the Dark Side
 
StreetSleepR's Avatar
 
2005 GTO Owner

Join Date: Sep 2006
Location: AZ
Posts: 437


Offline
Talking

can we get free shipping?
  Reply With Quote Quick reply to this message
Old 04-16-2009, 12:39 AM   #23
wesam
Registered User
 
wesam's Avatar
 
2004 GTO Owner

Join Date: Feb 2007
Location: Qatar
Posts: 696


Offline
what size do you recommend for a 500 hp with 200 shot motor ?
__________________
2004 M6 LQ9 408 11.2 CR
TF235 heads
Fast 102/102
1 3/4 kooks LT
DMH cutout
Mezire EWP
SLP UDP
3.73
GMM shifter
LS7 clutch
Sureflo OTRCAI
Sureflo CB
hotchkis
Griffen
King HHD

  Reply With Quote Quick reply to this message
Old 04-16-2009, 05:58 AM   #24
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by StreetSleepR...View Post
can we get free shipping?

Sorry, no free shipping on these.

Quote:
Originally Posted by wesam...View Post
what size do you recommend for a 500 hp with 200 shot motor ?

Wet shot? SVO 42's will work great for you.
  Reply With Quote Quick reply to this message
Old 04-16-2009, 07:49 AM   #25
69lt1bird
Registered User
 

Join Date: Nov 2007
Posts: 141


Offline
Seth,
Will the 39lb (30397-1) work for my setup be sufficient. I have the SVO 39lb blue tops and they wash the sides of the intake ports in these L92 heads, cone seems to wide I and guessing.
__________________
Free HP Tuners Beginners Tuning Guide

Michigan Snowmobiler
1969 Firebird: 7.55@97.93 1/8 1.70 60 ft.[/COLOR] EPS cam 234/246 .602.606 114+3, 6.0 LQ4, L92 heads milled 10.5:1, Ported L76 intake, ported 90mm Holley TB, 100mm MAF, FIC Custom injectors, Hooker LT, PYPES dual exhaust with an X pipe, 4L65e with all of the good parts inside, FTI 4000 RPM Stall, 12 bolt with 3.73 gears. HP Tuner tuned by me
  Reply With Quote Quick reply to this message
Old 04-16-2009, 09:23 AM   #26
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by 69lt1bird...View Post
Seth,
Will the 39lb (30397-1) work for my setup be sufficient. I have the SVO 39lb blue tops and they wash the sides of the intake ports in these L92 heads, cone seems to wide I and guessing.

Yeah absolutely.
  Reply With Quote Quick reply to this message
Old 04-16-2009, 10:24 AM   #27
CRZYLS2
Back at it again.....
 
CRZYLS2's Avatar
 
Other Holden/HSV

Join Date: Nov 2005
Location: Bay Area, Ca.
Posts: 948


Offline
Send a message via AIM to CRZYLS2 Send a message via Yahoo to CRZYLS2
I need a set of shorty 60 or 65 lb injectors for my 2009 G8. Is there a set that wont require adapters?
__________________
2009 PACIFIC SLATE G8 GT

2008 Ultrasonic Blue Mica IS-F

http://i196.photobucket.com/albums/a...MG3831-1-1.jpg
  Reply With Quote Quick reply to this message
Old 04-16-2009, 10:39 AM   #28
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by CRZYLS2...View Post
I need a set of shorty 60 or 65 lb injectors for my 2009 G8. Is there a set that wont require adapters?

The FAST 65's are plug and play.
  Reply With Quote Quick reply to this message
Old 04-16-2009, 11:05 AM   #29
CRZYLS2
Back at it again.....
 
CRZYLS2's Avatar
 
Other Holden/HSV

Join Date: Nov 2005
Location: Bay Area, Ca.
Posts: 948


Offline
Send a message via AIM to CRZYLS2 Send a message via Yahoo to CRZYLS2
Quote:
Originally Posted by Seth@HSC...View Post
The FAST 65's are plug and play.

Thanks

Whats shipping on these?

Last edited by CRZYLS2; 04-16-2009 at 11:07 AM.
  Reply With Quote Quick reply to this message
Old 04-16-2009, 11:19 AM   #30
Hinson Motorsports
Senior Member
 

Join Date: Jun 2008
Location: birmingham
Posts: 2,836


Offline
Quote:
Originally Posted by CRZYLS2...View Post
Thanks

Whats shipping on these?

Around $11.
  Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the LS1GTO.com Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 12:28 AM.




Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2003-2008, LS1GTO.com
Site Banner Design 2005-2007, Cylosoft

LS1GTO.com is not affiliated with General Motors Corp.