i currently run low 11s........ 11.35 is my best time ever. best 60ft is a 1.66 on factor stall "spraying a 150 shot". How much will a stall help. I want a 10 sec time slip bad!!! stock gears and stock cam, 04 ls1 . plan on a cam down the road. but just a stall for now. And what size stall??? i run hoosier drag radial......
i currently run low 11s........ 11.35 is my best time ever. best 60ft is a 1.66 on factor stall "spraying a 150 shot". How much will a stall help. I want a 10 sec time slip bad!!! stock gears and stock cam, 04 ls1 . plan on a cam down the road. but just a stall for now. And what size stall??? i run hoosier drag radial......
Tough to say. It depends on the stall. You should be close with the right size.
__________________
Quote:
Originally Posted by elpuerco...
Give me all your money or I will raise your cholesterol, increasing your eventual risk of heart disease!
i currently run low 11s........ 11.35 is my best time ever. best 60ft is a 1.66 on factor stall "spraying a 150 shot". How much will a stall help. I want a 10 sec time slip bad!!! stock gears and stock cam, 04 ls1 . plan on a cam down the road. but just a stall for now. And what size stall??? i run hoosier drag radial......
I would guess a 3600 would get you real close and still be a decent street car.
Pitt
You will probably pick up about 2/10s maybe a tinge more with a stall. Your 60fts are pretty good already I would have said 3-4/10s had you said you were in the 1.7 60ft range!
__________________
2004 GTO Black/Red 1 of 1 Run by Big Stuff 3
HKE Built 408
Fernando Built Custom Twin GT42R Turbo Setup and TH400
FTI (EDC) Custom Cam and Spec'd ET240cc Heads
FTI Custom Built Race Converter
1/4 Mile... 9.001 @ 152mph... Motor popped... Now we fix the problem!
1/8 Mile... 5.749 @ 123mph
60FT... 1.39
i currently run low 11s........ 11.35 is my best time ever. best 60ft is a 1.66 on factor stall "spraying a 150 shot". How much will a stall help. I want a 10 sec time slip bad!!! stock gears and stock cam, 04 ls1 . plan on a cam down the road. but just a stall for now. And what size stall??? i run hoosier drag radial......
Screw it and get a 3800-4000,Do it once and be done...LOL Serously with the Nitrous I don't know man but I say rather be big then small
he might blow through the converter if he is spraying , better get one built for spray
__________________
05 torred red black int auto
(1 of 400)
ngk plugs tr55 ,kn drop in ,drag bags
slp loud mouth II cat back
b&m trans cooler
homemade cai 4" and lots of (un) bolt ons
hotchkis bars
harrop x-member bushings
noltec bushings every where else
driveshaft shop one piece alumnium
kooks 1 7/8s headers
fti 3600 stall
he might blow through the converter if he is spraying , better get one built for spray
If he specifically " " that he sprayed the car why would he get something not built for the nitrous ? Is there really a manufacturer out there that would not ask that question before building one ?
__________________
Quickest stock engine GTO in the country
10.41 @ 132.47
Special thanks to:
GForce1320
FTI Converter & Transmission
LME Engines
Hinson Motorsports
Nitrous Outlet
Putnam Performance
If he specifically " " that he sprayed the car why would he get something not built for the nitrous ? Is there really a manufacturer out there that would not ask that question before building one ?
2005 GTO Owner
