Well I finally broke my goal of 400rwhp. On to the clutch.
__________________
M6 / JBA Headers / JBA Catted Mid Pipes / JBA Plug Wires / Borla Cat Back / Vararam CAI / Stage 2 ported stock intake and TB from Fasterproms / Custom blower cam from Ed Curtis at FlowTech / Scorpion 1.7 roller rockers (new style) / Dyno Tune done by Precision Autosports in Beavercreek Ohio / BP Catch Can / Pedders Street II with 20mm drop and sway bars / Royal Purple Engine oil
I'm shooting for 500 and will stop there. So far this is the most fun car I have owned. The blower will come after supporting mods like clutch, rear end and brakes.
Before mods were as follows:
JBA Headers / JBA Catted Mid Pipes / JBA Plug Wires / Borla Cat Back / SLP Predator 421 Bob Cat tune / Volant cold air intake and Mobil 1 engine oil. That put me at 340 rwhp and removing the lid off the Volant was 349 rwhp.
Now since then I added:
Vararam CAI / Stage 2 ported stock intake and TB from Fasterproms / Custom blower cam from Ed Curtis at FlowTech / Scorpion 1.7 roller rockers (new style) / Dyno Tune done by Precision Autosports in Beavercreek Ohio and Royal Purple engine oil with some NGK spark plugs. This combo put me at the 412 rwhp.
06 SRM A4 17"s*PS Coated LT's*Catless*Wretched Motor Sports H-Pipe*Spintech Super Pro St*LPE CAI*MSD*NGK*YANK 3600*180*Thermo*Derale Trans cooler*15% Tint*Debadged*FRC's removed*Angry Goat emblems*Headlight Armor tinted tail lights*Tuned by some guy at Vengeance*Countermeasures: Passport 9500 ix* Vengeance Heads and Cam package coming soon*
JBA Headers / JBA Catted Mid Pipes / JBA Plug Wires / Borla Cat Back / SLP Predator 421 Bob Cat tune / Volant cold air intake and Mobil 1 engine oil. That put me at 340 rwhp and removing the lid off the Volant was 349 rwhp.
Something doesn't sound right. Bone stock should be putting down 330-350 thru an M6 without a tune.
__________________
Current Rides:
2006 Torrid Red/Black M6 GTO - 1 of 380 (Magnaflow 12616, SF H-pipe, tune, etc)
2004 Yellow Jacket/Black A4 GTO - 1 of 657 (Spintech Super Pro's) Past Rides:
2008 G5
2004 Impulse Blue/Black M6 GTO
2000 Grand Am GT
1994 Bonneville SSEi
Something doesn't sound right. Bone stock should be putting down 330-350 thru an M6 without a tune.
Well that is what it did. I have seen some stock cars make more and some make less. Different dyno's as well. Not sure if this matters but the Dyno Jet was SAE corrected.
Nice! How much was the cam and how was the job to put it in?
The complete cam package with new springs, push rods and new bolts for the cam and balancer was $1,349 from Ed at Flow Tech. I had a shop do the install and tune. As I have never installed a cam before and knew it would need a tune afterwards. So that ran $1,687.20. There was some extra work involved to clearance the stock valve covers for the new roller rockers.
All in all I'm pretty happy with the car so far. Might need to have the idle bumped up a bit.
2005 Torrid Red Goat 6 spd, Corsa Sport Cat-Back, JBA Shorties and catted mids
Vararam CAI, LSS Shifter
228/232 0.600, 112LSA, Tune By CAM, HP 421 TQ 412
R278 Ruff Racing Hyperblack 18x8.5 and 18x9.5, Pedders Drag Springs
Sumitomo HTR Z II 245/45/18 front and 275/35/18 rear[/color]
Best Times 1/4 mi 12.8 sec, 108mph, 1.8 sec 60' with street tires.
So the install & tune ran you $1600 bucks? An idle bump to ~900rpm's will probably work out well for you.
Yes because of paying for the HP Tuners licensing for my car and clearance the valve covers for the roller rockers. Shop labor and misc things like anti freeze and such.
2006 GTO Owner
