Hey guys im new here and trying to figure out if this setup will work on my 06 goat i want to put on a set of staggered bbs reps...the sizes are as follows
Front is 18x8 with a +35 offset
Rear is 18x9 with a +40 offset
what i want to know is will these fit without any rubbing issues..right now the car has the stock suspension but i would like to lower it a little in the future...any help would be greatly appreciated thx!
well ive searched for a couple hours and all i can come up with is 18s x 8.5 or 18s x 9.5 which are wider...im buying these on the net so i cant exactly try em on first i just want to make sure they will fit b4 ordering....and thx for that link looks like the fronts will fit with no issue
Well a good way to do it yourself would be to remember an inch is roughly 30mm. IIRC our offsets on the 17s are 48mm. So the fronts would sit almost half an inch further out than stock, which will be fine. The rear will go into the fenderwell about 22 mm after taking into account the offset. Some light hammering of the fender may be needed, but overall they should be ok
2004 QSM GTO: Forged 347, bolt ons, stalled auto PHK
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.