Forums - View Single Post - IAT Relocate w/ factory air intake
View Single Post
Old 06-09-2019, 06:06 AM   #4
Registered User
AFAMET's Avatar
2006 GTO Owner

Join Date: Mar 2007
Posts: 481

Originally Posted by Logan71...View Post
I dont have pics, as since I did this I've removed the factory box.

When I had it, I drilled a hold in the front of the actual box (side facing the drivers headlight, not the lid)

..and used a rubber grommet that would both fit the slightly-oversized hole and the IAT sensor itself. You might have the best luck if you find a grommet that fits the IAT sensor, and then measure/drill afterwards, so get it right the first time. It would suck to have a grommet installed that the IAT won't fit in.

06 QSM A4 Diablosport tune and relocated fast acting IAT, drag bags, M/T DR'S DSS 1 piece
[email protected] on a 1.91 60ft
Local DA was 26 feet
I did it!!
  Reply With Quote