Looking for a few things for the Wife's 04 M6:
• DMS front bumper
• Catted midpipes (for JBA 1 5/8" shorties)
• SAP rear bumper
• Fiberglass VFN cowl hood (3" bolt on)
• Red interior inserts (door, dash, console, etc)
• Adjustable sway bars set
• BMR subframe connectors
• 1 pc aluminum...
I'm in the middle of deciding which direction I should go with my differential build.
The option that I see infront of me are as follow and in this particular order:
1- Wavetrac LSD
2- Detroit Truetrac LSD
3- Speedmaster TorqueWorm LSD
4- Kaaz LSD
I was/am dead set on the...
Guys i am out to buy a used 3.73 rear diff and have no clue how to inspect or what to avoid?
Is it a gamble?
Or should the oil color indicate anything or the drain plug if had a metal particles, how much is ok and when to call it bad diff
Now before I get reemed for making another rear end clunk post in the ocean of others, I have read through many of them and I feel like I have a good idea what it is, I'm just looking for some advice as to how to go about things.
I have replaced:
Trans mount with revshift...
I've been chasing down the dreaded rear-end clunk and while I was checking bolts, I found one of the bolts on this flange mounting to the diff completely loos, and the other two took no effort to loosen with an adjustable wrench.
I had to use an open-end wrench because all 3 bolts interfere...
First-time poster, sorry if formatting is wrong.
Does no one make factory replacements for the rear differential mounts anymore? All I can find is the poly INSERT for the rear mount, but no full mount replacement itself. There are used ones on ebay, but I find buying a used factory...