LS1GTO Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter #1
well i went to the track with my new nitto dr's and i got off a 13.35 with a 1.98 60' time? is that an alright time or can i do beter ive only got 326rwhp so give me some input on what i can do better, or if thats gana be my limit till i get more mods...
 

·
Former GTO Owner
Joined
·
1,884 Posts
Are you doing that consistently? I think if you can cut that 60ft time all the time with an occasional 1.7-1.8 then you are good.
 

·
Quest for 10's Continues!
Joined
·
3,561 Posts
You should be a little faster with that 60' and 326rwhp, but not a lot faster. Maybe 13.1x's

A 1.7 to lower 1.9s you'll see a nice drop in E.T!

For reference I went 13.68 @ 103.7 with 298rwhp, stock but with 3.91 gears, street tires at 35-38psi and terrible track prep! I hope to pick up some DRs myself and air them down to 18-22psi in which I should drop a few tenths and pick up some trap speed!

All in all, I'd say with some seat time, quick smokey burnout, 20psi and your 326hp you should be able to touch 12.9x-13.0x. . .

Just my $.02 Good luck :gears:
 

·
mid-11 second club
Joined
·
1,151 Posts
im an auto with a stock stall, and i cut a 1.90.....so with a manual you should be able to go into the 1.8's

that was N/A with 298whp on the dyno
 
1 - 4 of 4 Posts
Top