LS1GTO Forums banner

1 - 8 of 8 Posts

·
silver gto
Joined
·
22 Posts
Discussion Starter #1
I am the proud owner of a Quicksilver M6 for about 2 weeks now. Love the car and am usually Appearence conscious for all of my vehicles.

What I've done so far:
*Clear bra-3M Scotchgard product. The hood, front fascia and quarter panels are covered and looks fantastic. Cost was $495.00
*Clear Protective Headlight/Foglight Sheilds. This is a similar product as above but is 40 mm's thick. If you'd ever replaced a Headlight Lens and know the cost of one of these things is the reason for the add on. Cost about $50.00 with shipping.
*Skip shift from LS1. Very easy install.

I enjoy the informative posts and replies from everyone and look forward to future reads.

Hmmm....LS2 Heads and a Cam....Better wait a few more months.

Thats about it for know.

Winston
Quicksilver M6
 

·
Captain Thread Killer returns
Joined
·
21,898 Posts
Welcome to the nutjob
 

·
Registered
Joined
·
3,255 Posts
Welcome to Ever-Ever land.
:drink::drink:
 

·
Registered
Joined
·
7 Posts
Where did you get the 3m Bra? Do you have any pics of it after installation?
 

·
silver gto
Joined
·
22 Posts
Discussion Starter #5
Regarding the clear bra...look up this 3M Website and it will give a dealer/installer in your area.

I found several in my area and called them all for the best price. This was a 3 hour application and the results were impressive. You can see very un-noticeable lines where it meets the paint but other that....No Rock Chips or Bug Guts eating my paint!!!

Try this site: (http://solutions.3m.com/wps.portal/_s155/86661)

Keepin it Clean....Good Luck
Silver GTO
 

·
CARmotorsports.com
Joined
·
327 Posts
silver gto said:
I am the proud owner of a Quicksilver M6 for about 2 weeks now. Love the car and am usually Appearence conscious for all of my vehicles.

What I've done so far:
*Clear bra-3M Scotchgard product. The hood, front fascia and quarter panels are covered and looks fantastic. Cost was $495.00
*Clear Protective Headlight/Foglight Sheilds. This is a similar product as above but is 40 mm's thick. If you'd ever replaced a Headlight Lens and know the cost of one of these things is the reason for the add on. Cost about $50.00 with shipping.
*Skip shift from LS1. Very easy install.

I enjoy the informative posts and replies from everyone and look forward to future reads.

Hmmm....LS2 Heads and a Cam....Better wait a few more months.

Thats about it for know.

Winston
Quicksilver M6
Winston.......If you are "appearance" oriented then you may want to look at the CAR Motorsports Custom Embroidered Floor Mats, Trunk Mat, Underhood Insulator, Trunk Lid Cover along with the Embroidered GTO Car Cover. Many of the list members have these products on their cars. Links are below:

http://www.carmotorsports.com/floormats.htm
http://www.carmotorsports.com/car_covers.htm
http://www.carmotorsports.com/UHI_GTO.htm
http://www.carmotorsports.com/Trunk_Lid_Cover.htm

Rich
 

·
silver gto
Joined
·
22 Posts
Discussion Starter #8
CAR Motorsports said:
Winston.......If you are "appearance" oriented then you may want to look at the CAR Motorsports Custom Embroidered Floor Mats, Trunk Mat, Underhood Insulator, Trunk Lid Cover along with the Embroidered GTO Car Cover. Many of the list members have these products on their cars. Links are below:

http://www.carmotorsports.com/floormats.htm
http://www.carmotorsports.com/car_covers.htm
http://www.carmotorsports.com/UHI_GTO.htm
http://www.carmotorsports.com/Trunk_Lid_Cover.htm

Rich
Hi Rich,

I am waiting for the GTO emblems you guys are getting ready to offer. That was about a week ago last I've heard. Any ETA yet?

Thanks,
Winston
Silver GTO
Houston, TX
 
1 - 8 of 8 Posts
Top