LS1GTO Forums banner
1 - 2 of 2 Posts

· Registered
2006 GTO Cyclone Gray Metallic, 6.0, Magnuson 112, ported 243's, JBA shorty header
Joined
·
950 Posts
Discussion Starter · #1 ·
So, I'm going to do a DW300 and the 8.1 bucket mod and I noticed that this mod is several years old are these still the part numbers I use, or has it changed?
8.1L GM Part Number GM#88965372 or AC Delco PN MU1312
Revised Part Numbers GM # 19133455 or AC DELCO PN MU1417
Float Sensor unit part number is GM#88965379
Also I can't find a source for the APE Flexible Plastic Hose and length.
Thanks for the help guys
 

· Registered
Joined
·
980 Posts
I did the 8.1L bucket on my first GTO in 2004, but we didn't have many options or know much back then. The dw300 drops in the stock bucket without issue. It should support your current power on pump gas in the stock bucket. Only cammed sbe with 8 psi correct? The 8.1L bucket mod is pricey for what it gets you. For the money there are much better options.
 
1 - 2 of 2 Posts
Top