LS1GTO Forums banner

1 - 7 of 7 Posts

·
Registered
06 GTO Spice Red 4A
Joined
·
9 Posts
Discussion Starter · #1 ·
Anyone had their GTO aligned recently? Just wander what numbers you are using if you have a stock height/basically stock suspension.
 

·
Premium Member
Joined
·
1,256 Posts
Getting mine done monday morning. I believe i had a sheet from whiteline on specs and some pedders specs saved on my laptop
 

·
Registered
06 GTO Spice Red 4A
Joined
·
9 Posts
Discussion Starter · #3 ·
I have seen some of the specs from threads from way back. Just wandering if any anyones preferences have changed or updated.
 

·
Performance Addict
2005 PBM, 6 Speed, corner carver
Joined
·
213 Posts
This is how I have mine and it works great for my use.

Front:
Camber -.9
Caster +8.25
Toe out 1/8”

Rear:
Camber -1.5
Toe .00


I’m running lovells 20mm drop springs and Koni shocks.
 

·
Registered
06 GTO Spice Red 4A
Joined
·
9 Posts
Discussion Starter · #5 ·
I ask because the OE specs appear to be rather broad in scope in my novice opinion.
 

·
Performance Addict
2005 PBM, 6 Speed, corner carver
Joined
·
213 Posts
Toe out in the front?
Toe out helps the car turn in better. The steering is a bit more responsive to initial inputs to change direction. The car is driven less than 6,000/year so tire wear is not an issue for me.
 
1 - 7 of 7 Posts
Top