LS1GTO Forums banner

1 - 20 of 21 Posts

·
Registered
Joined
·
406 Posts
Discussion Starter #1
Has Anybody Used Boos Performance In Anoka? There Corvette Specialists.i Went In To Ask Them About A Dyno Tune And Asked If They Worked On Gto's. They Said Yes That They Used Hp Tunes And A Tune Would Cost $590.00, And They Would Need My Car For 3-4 Days, Because They Do A Street Tune And Dyno Tune And That By The Time There Done Tweeking The Car It Would Have At Least 50 Miles Put On It.they Had Four Vetts In The Shop One Was A Race Car.
 

·
please stand by...
Joined
·
1,025 Posts
a week to tune a stock car?? :rolleyes:

running 13.1 to 13.00 with 60 foots of 2.0 to 1.98's here constitanly, in heat no IAT mod yet, on my tune. Going to school in oct and nov to get some knowledge and credit to my name.

May want to try Doug Rippley in buffalo,mn. I think he about 550 and needs a day. Hes is other major corvette guy. He been in motor trend mag a few times.

Never heard of other guy you mention.
 

·
Iowa Goat Roper
Joined
·
113 Posts
I'll ask at work next time I see one of the MN people if they have heard of the guy, my company has a dealer up in Anoka, too. No telling when I'll catch one of the MN guys at work, though....
 

·
Registered
Joined
·
406 Posts
Discussion Starter #4
Thanks
 

·
Registered
Joined
·
171 Posts
You don't want to go to Hitech in Ramsey?
 

·
Registered
Joined
·
406 Posts
Discussion Starter #6
i emailed them and never got a response.i heard they dont have software for ls2.must not want my business
 

·
Registered
Joined
·
406 Posts
Discussion Starter #8
waiting for an answer?
 

·
Registered
Joined
·
171 Posts
I haven't been to Hitech lately, sold my car about a year ago. I know they weren't able to do LS2s then, but I can't believe they still don't have the software. They've tuned quite a few of the local GTOs. I never emailed them. I always called or stopped in.

Anyway, I thought they did a good job on my car so I figured I'd mention them. If you have a problem with them, that's fine. They're not the only game in town.

Troy
 

·
Registered
Joined
·
406 Posts
Discussion Starter #11
ill talk to you at the rock if your there.i want a wally.
 

·
2gtos
Joined
·
114 Posts
I brought my 68' to Olsen Corvette in St. bonnie this summer. They tuned over 35 extra hp out of it on the chassis dyno and the price was very reasonable. They specialize in late model corvettes so the new GTO should be no problem for them. I plan on bringing them my 04' some time this fall. I'll let you guys know how it goes.
 

·
please stand by...
Joined
·
1,025 Posts
no the wally is mine lol.

Sounds like there might be 2 goats duking it out in the final round.

Most of my family going to be there. going to the muscle car race on sunday?
 

·
Registered
Joined
·
406 Posts
Discussion Starter #14
all depends on the weather.should be three goats there then 71 gto from rainout from last rfr allways goes.
 

·
Registered
Joined
·
2 Posts
i emailed them and never got a response.i heard they dont have software for ls2.must not want my business
Juniper, (I know im digging up an old post)

I apologize for that. We went through a website change, as well as individuals who run the website, along with it 100s of emails were lost or redirected incorrectly..

We do not have the LS2 software in hand, we have been waiting to get enough interest with local individuals to make the purchase. If we have a customer who would like to set up a date to have thier LS2 tuned we will make the purchase, its not an issue.

We are currently (and I mean as of right now, im covered in sheetrock dust) completing the finishing work on our new shop which will be located in Elk River on Hwy 10 (about 6miles west of our current location in Ramsey). The new complex is over 16,000sqft with a 5000sqft shop, machine shop, separate chassis dyno cell, engine dyno cell, and parts area. Because of the move our dyno will be no operating next week (dec 11-15th).

Casey Wittmer
Ford Specialist
www.hitechmotorsport.com
 

·
Registered
Joined
·
208 Posts
Hi Tech is a good place to go in MN. I am picking up my cam from them this weekend and then just need time to put it in!
 

·
m1tankr
Joined
·
136 Posts
I was one of the two LS2 guys that had a Dyno tune appointment with you guys and ended up cancelling when the owner finally admitted to me two days before it that the demo EFI Live you guys were gonna try out wouldn't tune LS2's. I wasn't too happy as for the last year I had been bugging you guys about it. Let us know as soon as you guys are ready to do LS2's. It did strike me as a little funny that you guys are HiTech motorsports and can't work on the current and future generation of LS motors. I'd like to use you guys for engine work on my TBSS as you have a good rep on the LS1's. Are you guys putting in a 4 wheel dyno for us TBSS and pick-up truck guys?

For the original poster asking about Boos. I did a bunch of checking and he does have a good rep for tuning and work, but he is expensive. He is known for spending a lot of time on the tunes and they do a lot of custom LS engine work. Blowers, turbos, all sorts of exotic transplants of LS motors.
 

·
please stand by...
Joined
·
1,025 Posts
maybe if you had some local enthusiasts' help you out with your tuning project. You would have better success.

So I take you it got a TBSS? nice truck!!!
Have you been CFR??
 

·
m1tankr
Joined
·
136 Posts
maybe if you had some local enthusiasts' help you out with your tuning project. You would have better success.

So I take you it got a TBSS? nice truck!!!
Have you been CFR??
You mean someone that offered like hammer? :stickpoke
I do plan on hooking up with you to learn more about the HPTuners. I've been using it a little bit. I'm sending it in for the upgrade to the the Pro and now I have the LC1 set-up.
I'm mostly looking for a shop for a cam/head swap.
 

·
please stand by...
Joined
·
1,025 Posts
You mean someone that offered like hammer? :stickpoke
I do plan on hooking up with you to learn more about the HPTuners. I've been using it a little bit. I'm sending it in for the upgrade to the the Pro and now I have the LC1 set-up.
I'm mostly looking for a shop for a cam/head swap.
Spring time I will be making some rounds, I am attending some classes in FEB in ohio, so I can give the absolute best in my tunes. ;)
 
1 - 20 of 21 Posts
Top