LS1GTO Forums banner

1 - 2 of 2 Posts

Rear Seat Delete Builder
4,000 Posts
Discussion Starter #1
Lets see whats first:
I made up a batch of intake covers.they cover the hole behind the throttle body. My car club all wanted some. held in with double stick tape.

Next up was to cap the holes that the bastards at the dealer did when they installed the front plate . .20 3/16 nylon caps,ainted to match with touch up paint. I had to trim the holes. After that clean and wax around them.

Next up was a deadpedal install. I used the 8" 2x4 , rounded on one end. I added 2 -2" L brackets to steady it and tucked it under the carpet.

Soon to be done is a custom sheetmetal CAI cover . That will the sweet part under the hood.
1 - 2 of 2 Posts