[Skywarp]

What does the new Goat have as far as a cam. It makes 350hp witha LS1 head. Maybe a ZO6 cam.

 

[Skywarp]

Nobody knows?

 

[DevilYellow]

Nope ... nothing that is really published from GM, I'm sure someone can find them. The only other way to do it is to yank the cam and have it checked out on a cam dr.

 

[CMNTMXR57]

I thought it was basically the stock Vette cam or very close to it. So those specs would be fairly accurate. I think they were .496 lift @ .050 or something like that. I forget the duration and lobe separation though. My guess would be around 212* of durartion and 116* L.S. but don't hold me to that.

 

[BillyGoatGruff]

I believe I saw something about cam specs in the silver special edition booklet. The one that buyers receive after their purchase of the GTO.

 

[EDC]

I thought it was basically the stock Vette cam or very close to it. So those specs would be fairly accurate. I think they were .496 lift @ .050 or something like that. I forget the duration and lobe separation though. My guess would be around 212* of durartion and 116* L.S. but don't hold me to that.

Stock 2001-2003
.479".467"
207*-196*
116* sep
117*/115*

2001 LS6
.525"-.525"
211*-204*
116* sep
114*/118*

Hope this helps... :wall:

Ed

 

[DANSLS1]

The LS6 cam is PN 12565308 and features 204/218 degrees duration at .050 and .550 lift with a 117.5-degree lobe separation angle compared to the stock cam with 196/207 degrees duration at .050, .479/.467 lift, and a 116-degree LSA.

The above comes from the highperformancepontiac article about the autocross GTO showcar.