LS1GTO Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hey guys, Im having an issue where my clutch line retaining clip keeps popping off. I have the tick performance clutch master cylinder which I thought would go directly from the reservoir to the slave but it doesn’t. I was on my way home and I lost pedal pressure to discover that it had come off again. Has anybody had this issue and if so how to fix it permanently.
504157
B203AFA6-3A62-4FF4-9F5C-F9E6F3F4F369.jpeg
B203AFA6-3A62-4FF4-9F5C-F9E6F3F4F369.jpeg
 

·
Registered
Joined
·
746 Posts
Drop the trans. Know out the pin, put in a new fitting that 3an. Run a 4' line with a 90 on the other end and attach it to the master. Super simple.
They only made the kit like that so you wouldnt have to drop the trans and theres nothing wrong with the metal line.
 

·
Registered
Joined
·
10 Posts
I had this exact same problem. I found that the clip was on backwards. I turned the clip around and installed it on the other side of the fitting. VIOLA!!!! FIXED!!!
 
1 - 4 of 4 Posts
Top