LS1GTO Forums banner

1 - 2 of 2 Posts
Joined
·
293 Posts
Discussion Starter #1
don't worry, i've done a search, read all the threads, most of them are pretty old. somebody said he tried a 1" spacer and still couldn't fit. somebody else claimed to have fit them using a 1/4" mounting ring. what's the final word?

bottom line--is there anybody here running the eD eu-700 drivers mounted in the stock locations on the rear shelf? did you modify the existing plastic mounting ring? did you use an MDF spacer? what thickness?

there are a limited number on sale for $37.50 each (+ shipping of course) and i'm giving these a REAL hard look. i have no problems making spacers/baffles/mounting rings, but don't want to get much more involved than that because of time and budget constraints.

thanks a lot.

chris
 

·
Suffering Fools
Joined
·
15,298 Posts
You should be able to make them fit one way or another. The only thing I can see that might be an issue is the diameter of the basket and how it doesn't really taper in.

I'd try them, and if they don't work, put them on eBay. You may get your $37.50 back.
 
1 - 2 of 2 Posts
Top