Huron Speed Twin Turbo Kit
Join the discussion
Recommended Reading
-
Boost plan change...TVS2300 instead of the Procharger
Forced InductionOK, after much agonizing and over-analysis I have decided to go down the Positive Displacement path instead of the Procharger Centrifugal path. What changed my mind? A ride in a TVS2300 boosted car.........simple as that. There is something to be said for the 'area under the torque curve'...- 45
- 848
-
lejambcr · updated
-
Anyone try the flip twin turbo headers yet?
Forced InductionLooking into the ls flip twin turbo headers or the B&M performance V-2 hot side has anyone done these?- 3
- 132
-
Crank Pin Kit Question
Forced InductionThere are several good crank pin kits available but my question is a little different. Lets say you install a pin kit and then sometime down the road you do a timing chain or cam swap, now how do you get the balancer side of the holes lined up with the crank holes for a re-install? The...- 4
- 177
-
lejambcr · updated
-
Sanity Check On Fuel Injectors and Fuel Pump Selection for Procharger Installation
Forced InductionAbout ready to pull the trigger on the Procharger order for my 2006. Even though I'm only planning 7-8 PSI at 6500 RPM I'm going to opt for the D1SC and Race intercooler due to the typically high ambient temps here in NC. My target is 550 RWHP (currently at 400). Using some of the equations...- 21
- 517
-
lejambcr · updated
-
Intake manifold for turbo setup
Forced InductionWhat is the best intake manifold and throttle body setup (not trying to spend that much on it) to get a little more air flow (around 90mm opening) for my 408 paired with the APS twin turbo kit. Must fit under the regular hood and the Fast intakes are not an option as they are 2 piece. Should I...- 3
- 243
-
Frank12 · updated
Join now to ask and comment!