LS1GTO Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,745 Posts
Discussion Starter · #1 ·
I jacked up the drivers side of the car so all the oil will drain to the drain plug. I took the 4 bolts out holding up the metal pan (13mm) and just let her rip. I let it drain a few minutes. Dropped the oil filter (PF-44 came out but the manual says PF-46 so that what I put on). Filler her up and reattached the pan. Every thing went fine. I didnt notice any metal in the oil catch pan, so everything is good.

It wasnt as hard as I thought it would be.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top