LS1GTO Forums banner
1 - 3 of 3 Posts

· Gone but not forgoten
Joined
·
206 Posts
Discussion Starter · #1 ·
ok im thinking of upgrading supsension on my goat. but i like the cushy ride it has.

is it possible to just change the rear out like just using koni shocks, pedders or king springs, and drag bags, then the noltech rear control arm nushing and noltech diff bushing as well as the hotchkis stabiler bar both fornt and rear. would this hurt anyhting and has anyone tried it. im looking for near oem ride quality but good launches at the track. thanks in advance
 

· Registered
Joined
·
4,896 Posts
Why would you turn your car into an exercise in suspension design? Suspensions are systems that must work together. Urethane comes in a wide range of dura (hardness), coils in a wide range of rate and dampers across the board on the critical damping scale. Find a GTO with suspension mods you are considering and arrange a test ride / drive. You should know what you want and what you will get before you start spending your money.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top