LS1GTO.com Forums banner

1 - 3 of 3 Posts

·
been beat by a Nana lately?
Joined
·
3,874 Posts
Discussion Starter #1
Hey Gene. Long time no talk. How ya been?

I was looking to see if I could get a new key/fob for my 04, through your website, but I'm not finding it. I can do the programming, just need the key. All the buttons on mine are worn through.

Any help?

Thanks!
~Lisa
 

·
'12-'13 ScrScca SM Champ
Joined
·
7,095 Posts
Hey Gene. Long time no talk. How ya been?

I was looking to see if I could get a new key/fob for my 04, through your website, but I'm not finding it. I can do the programming, just need the key. All the buttons on mine are worn through.

Any help?

Thanks!
~Lisa
Give him a call or just order it with PN 92141426 under the Pontiac make.

All you replace is the fob, you reuse your old key blade.

To program the new fob to your car.

Turn the ignition to ON, then wait 10 minutes for the next step in the programming sequence.
After the 10 minutes has elapsed, the car horn will chirp once. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
Leave the key to the ON position for 10 minutes. After the 10 minutes has elapsed, the car horn will chirp twice. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
Leave the key to the ON position for 10 minutes. After the 10 minutes has elapsed, the car horn will chirp 3 times.
Verify that the security indicator in the instrument cluster has stopped flashing and attempt to start the vehicle.
Turn the ignition to OFF and remove the key from the ignition switch.
Move approximately 3 meters (10 ft) away from the vehicle and test the transmitter functions to validate that the transmitter has been programmed successfully.
 

·
GM Parts House. Com
Joined
·
1,887 Posts
Hey Gene. Long time no talk. How ya been?

I was looking to see if I could get a new key/fob for my 04, through your website, but I'm not finding it. I can do the programming, just need the key. All the buttons on mine are worn through.

Any help?

Thanks!
~Lisa
Hi Lisa,

I haven't heard from you in quite a while. Nice to hear from you! I can help you out with the FOB, but I can't get you a cut key as GM doesn't allow us to get the key cut for someone unless they are local to us. I can get you a FOB and a blank key and the screws if you're interested. Feel free to send me an email or give me a call!

Thanks. Gene.
 
1 - 3 of 3 Posts
Top