LS1GTO Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1
hey guyzzz

i'm tryn to get a camshaft for my car

i have ls1 holden monaro A4 (like the GTO)

and my modz:kooks long headers, slp loud mouth2 cat-back system, asp pully
msd sprk plug wiers , k&n air charger , b&m trans super cooler and transgo shift kit

and ratio 3.46

and dyno tune

331wrhp
341 wrtq

i will post the sheet later

i'm tryn to make it aroun 400wrhp

note: i'm using the car every day

c ya:)
 

·
LS-WON
Joined
·
741 Posts
Check out the sponsors to the left. I know lots of LS1 owners who are running comp grinds on here from HPE or LG Motorsports. With a fairly aggresive cam and a set of heads 400rwhp is a reasonable goal. I have the LG Motorsports G5X1 cam, but you might look at the X2 or X3 which are a little larger cams and will put you closer to your goal. This has been discussed a lot on here too, so if you didnt do a search you would be doing yourself a dis-service.
 

·
CAUTION!!!!
Joined
·
9,883 Posts
you're gonna have to be running heads and cam to get 400RWHP with an auto. but get a good set of P&P 243 castings or better (AFR,ETP) with a cam that has around 600 lift and you could do it.
 

·
Kahuna Bill
Joined
·
726 Posts
Thunder Racing TR224 is an all around great performer in the LS1.
 
1 - 10 of 10 Posts
Top