LS1GTO Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3,935 Posts
Discussion Starter #1
Does anybody know the piston to deck height at TDC on the LS2? Is the piston in the hole any, flush or out?

I just took my car apart to replace the lifters since it had such a bad top end noise (see my other post), replaced them and it is quiet now- but it just hit me that they sold me an LS1 headgasket when I did the work on my car. I didn't even think to check it- that'll teach me. Now I am wondering if it was the pistons hitting the gasket that was making the noise I had. I just hope if it was, there was no bearing damage from it. The car hasn't been driven, just started a couple of times. Still going to bug me. I'll have to go look at the gasket and see if it looks like the pistons were hitting it. Pisses me off- if it was the gasket and not the lifters- it just cost me $300 to fix something that wasn't broken plus a LOT of time trying to diagnose the problem!!!! Thanks.
Joe
 
1 - 1 of 1 Posts
Top